JUSTNAILS JUST PRESS - Extend Glue Gel 30ml
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: AG3-44.2
- Kostenloser Versand ab € 80,- Bestellwert
- Versand innerhalb von 24h*
- High Quality Produkte
JustNails Extended Glue Gel is suitable for extension with Dualtips/Fullcover Tips.
Apply the gel to the inside of a Fullcover Tip. Press the matching tip onto the matching nail and make sure that there are no air bubbles in between. There should also be no gel squeezed out of the sides.
Do not roughen the tips from the inside beforehand so that you can pull it off well later. Make sure that they have enough gel to stability on the nail because the tip comes away again. Harden the tip that you have pressed on the nail with a handy UV/LED hand lamps about 10 seconds. We have special smaller lamps that are suitable for full cover tips.
When the tip is firmly cured, place the hand in a stronger normal UV LED lamp for another 60 seconds so that the gel can cure completely.
Remove the Fullcover Tip after curing. If you use a long tip, we recommend after you have pulled the tip away again to model a build-up layer for reinforcement on the nail so that the nails have enough stability. With shorter Fullcover Tips it is also enough without a second build-up layer.
After you have pulled the tip away, you must remove the sweat layer with a cleaner. File the transition to the nail edge with a suitable cutter bit to hide protruding and angular edges (If you do not have a cutter, use a file carefully). Pay attention to your nail hat!) Buffer the structure so that you can continue with the color application. Now you can apply the desired color gel as usual and harden. Finally, seal with our "Secret Beyond Shine" sealer.
Please note that if you do not use a hand lamp beforehand, the tip can slip in a normal lamp because you can not press it into the correct position.
-> Since the Extend Glue Gel has a layer of shine after curing, the Fullcover Tip cannot stick to it long term, so we remove it here with this method. If you want to have a method where the Fullcover Tip stays on, you need a gel that does not have a sweating layer. With this method, the Fullcover Tip must then also be roughened from the inside.