JUSTNAILS Base Rubber Builder - FLEXI BUILD UP - Hybrid Shellac Gel

JUSTNAILS Base Rubber Builder - FLEXI BUILD UP - Hybrid Shellac Gel

Highest quality at the highest level! Our Rubber Base Gels are specially developed for adhesion problems and are able to cope with the biggest and most stressful daily studio routine. Due to the perfect self-smoothing but not running away consistency, it is very easy and in schnellsmöglicher time to model the nails! 

Perfect for thin and brittle nails thanks to the elastic formulation. The base works perfectly with the natural nail, you do not have to worry about mechanical damage.

APPLICATION:

Prepare the nail as usual and remove the cuticle. Use our Ultra Prep Dehydrator to degrease the nails and our Ultra Double Bond Primer to prepare for the upcoming gel. Let both liquids dry in the air for about 20 seconds (no additional base gel is needed!). Now you can apply a very thin layer with the Flexi Builder Base  (Do not cure, this serves as a contact layer for the next thicker layer). Now take more gel and model the C-curve and the stress point. Let the gel dry for 60 sec. in the UV/LED lamp.

TIP: Make sure that your lamp always has at least 48 watts and a maximum of 60 watts (We recommend a 48 watt lamp because they do not work with low heat mode. Using a lamp that does not automatically operate in low heat mode ensures that extremely highly pigmented gels are completely cured).

Now continue by not removing the sweat layer but either painting a JustNails Polish Soak-off Gel color on it or leave the nails as they are now. Finally, you only need to seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers!

To remove the nails, you just need to roughen the top sealant layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover liquid onto a cello pad, wrap it around your finger with aluminum foil or our handy reusable Shellac Clips and let it sit for 10-15 minutes. Take off the cellte and carefully remove the gel residue with a pro-pusher or rosewood stick.

Alternatively, of course, you can simply file off Hybrid Base Builder gels with a burr as you would with a traditional hard gel and soft gel manicure.

Keep away from children and fire. Avoid contact with eyes. In case of contact, rinse eyes with cold water. Consult your doctor.

For professional use.

Special Features:

• Flexibility and durability in one.

•  

  Perfect work with a natural nail.

• Build up possible.

• Perfect for thin and fragile nails that need support.

• Self-leveling consistency.