JUSTNAILS ShapeX Fullcover Soft TIPS - Sculpted Long Stiletto

JUSTNAILS ShapeX Fullcover Press On System Nails

With this new innovative system you now have even more options. You no longer need a gel build-up layer and therefore save an enormous amount of time.

The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail.

Thanks to the innovative material, which is far superior to regular ABS plastic nail tips, it is now possible to dissolve the tips even more quickly and there is a completely new way of applying them:

APPLICATION

MATERIAL: Polymethyl methacrylate - high-quality, stable plastic that is both lightweight and very robust.

1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer.

You can now attach the tip with several gels. You have the choice between:

Xpress Tip Glue Gel thin

Xpress Tip Glue Gel thick - in tube

2. Choose the right tips and ideally place them in position before applying the gel.

3. Apply a very thin layer of the Xpress Tip Glue Gel to the natural nail and allow it to harden in the lamp for 60 seconds.

4. Now apply the ShapeX PREP to the inside of the tip. The top tip layer is softened so that it can optimally bond with the next gel layer. Now wait approx. 1 minute until the next step so that the liquid can evaporate completely.

5. Now apply a layer of Xpress Tip Glue Gel to the softened layer of the tip and then press it carefully onto the nail that has already been prepared with the same gel. The sweating layer of gel on both sides will ensure that everything bonds together perfectly. Be careful not to apply too much gel and not to squash it into the nail edges. First press the tip at the top and then go down carefully so that no air bubbles form. Do not press too hard so that the gel is not squeezed out again.

6. Now hold our handy UV/LED hand lamp or the swan lamp on the finished nail for approx. 10-20 seconds to solidify the gels together. If you are using a lamp with more than just one LED and more than 3W, you can now cure the nail for good.

To cure the gel, place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer.

For a refill, you can soak the entire nail with Remover including the tip, or file off the entire tip together with the underlying gel. Always leave a thin layer of residual gel on the nail when filing to protect it.