JUSTNAILS  Premium Starter Set - for perfect and long-lasting nails With this high-quality set, you get all the gels and accessories you need for your nail modelling in one click. Application  Prepare the nail thoroughly with the buffer, push back the cuticle with the propusher and file the nail into shape and work sufficiently the cuticle and the nail bed. The nail bed must be completely matt and filed with the buffer! (*For optimal durability, a cuticle nipper to remove dead cuticles and cuticle bit + cutter is recommended) If they want to extend the nails with the nail tips, they spread the Ultra Prep Dehydrator on the nails and let it air dry until the nail is matte again. Now choose the right tips and smear some glue on the inner surface of the tip. Now stick the tips on the nail tip and hold it for 5-7 seconds so that it can dry.  File the tip now in the right shape you want to have and wear them also the transition carefully with the supplied files down so that there is NO noticeable transitions from the natural nail to the tip. Take good care of the natural nail and do not file it! Matt the tip completely with a file, no shiny spots should be visible. Use our in the set included Ultra Prep Dehydrator and afterwards the Primer Ultra Double Bond Primer, let them air dry. If you have glued tips, apply these liquids ONLY to the natural nail and not to the tip. Prime the nail + tip with a thin layer of Base Gel Super Bond and let this gel harden in the lamp Now build up the nail with one of the included build up gels. Decide while working which of the two consistencies you like better. Both gels can also be combined or mixed. For the beginning you can also build up the build-up in 2 layers and let it harden in between in the lamp, make sure that you do NOT remove the sticky sweat layer in between. Let the gel harden in the lamp (LED:60sec./ UV:120sec) when you are done with the build-up and then remove the sweating layer with a cleaner.  Now you can file the nails into shape, remove the filing dust with a dust brush and coat the nail with a color gel with the supplied brush. Make sure that you always work in thinner layers rather than thicker so that no unsightly deformations form and paint the colors from top to bottom. Make sure that you also apply enough pressure at the bottom of the nail so that not too much of the color gel is deposited there, because if you apply several layers, the nail could become too thick at this point. Let the color gel now harden and do NOT remove the sweating layer but seal now in a thin layer with the Secret Beyond Shine sealant. Let this also in the lamp to the end now twice as long harden.  Let the nails cool down and do not touch them for at least 1 minute. Later they can apply nail oil on the cuticle and already your perfect nails are ready Scope of Delivery: Buffer (to roughen your nail bed, (*For best durability, a cuticle bit + cutter is recommended)) Ultra Prep - Dehydrator 12ml (to degrease your nail optimally) Primer Ultra Double Bond Primer 12ml (to prepare your nail perfectly for the modellage) Brush (to apply the gels) Base Gel Super Bond 5ml (the first bonding layer) Fibre Extreme Intense 5ml & Alround Phase Gel 5ml (build up gel) 2 bestselling color gels randomly selected 5 Files (To file your nail in shape before modelling and to correct the shape after  the build up gel) 500 Zeletten + 100ml Cleaner (to remove the sweating layer of the build up gel before filing and to clean the tools and brushes) 10ml nail oil  Propusher (to push away the cuticles) 100 tips in a box + 7g tip glue  UV/LED combination lamp Complete your nail set for a perfectly lasting modeling with a cutter and the matching cuticle bits + Abtragebits to the modeling after 4 weeks to file down again comfortably.

JUSTNAILS  Babyboomer Set - for the perfect natural look With this high-quality set, you get all the gels and accessories you need for a perfect baby boomer modellage in one click. Application  Prepare the nail thoroughly with the buffer, push back the cuticle with the propusher and file the nail into shape and work sufficiently the cuticle and the nail bed. The nail bed must be completely matt and filed with the buffer! (*For optimal durability, a cuticle nipper to remove dead cuticles and cuticle bit + cutter is recommended) If they want to extend the nails with the nail tips, they spread the Ultra Prep Dehydrator on the nails and let it air dry until the nail is matte again. Now choose the right tips and smear some glue on the inner surface of the tip. Now stick the tips on the nail tip and hold it for 5-7 seconds so that it can dry.  File the tip now in the right shape you want to have and wear them also the transition carefully with the supplied files down so that there is NO noticeable transitions from the natural nail to the tip. Take good care of the natural nail and do not file it! Matt the tip completely with a file, no shiny spots should be visible. Use our in the set included Ultra Prep Dehydrator and afterwards the Primer Ultra Double Bond Primer, let them air dry. If you have glued tips, apply these liquids ONLY to the natural nail and not to the tip. Prime the nail + tip with a thin layer of Base Gel Super Bond and let this gel harden in the lamp Spread the Premium Milky White French Gel included in the set on the nail tip and blur it out with the Ombre Brush included in the set so that it is fainter and fainter towards the top and let it cure in the lamp. Use one of the covergelsincluded in the set   and spread the gel from top to bottom with the ombre brush , make sure that the gel gets weaker and weaker towards the middle and thus a smooth flow between the white tip and the cover gel is created. Let the Cover Gel harden in the lamp. Model now with the Lux Sculpe Milky Rosé or the New Line Sculpe Rosé a structure. Through the lightly colored 1-phase gel, the so-called ombre effect is again concealed and even more beautiful. Let the gel cure in the lamp (LED:60sec./ UV:120sec) and then remove the sweating layer with a cleaner.  Now you can file the nails into shape, remove the filing dust with a dust brush and seal the nail with the Milky Finishgel included in the set.  Leave the nails now to the end twice as long in the lamp and already are your perfect baby boomer nails ready Let the nails cool down and do not touch them for at least 1 minute. Later they can apply nail oil on the cuticle Scope of Delivery: Buffer (to roughen your nail bed, (*For best durability, a cuticle bit + cutter is recommended) Ultra Prep - Dehydrator (to degrease your nail optimally) Primer Ultra Double Bond Primer (to prepare your nail perfectly for the modellage) Brush (to apply the gels), Ombre brush (to spread the cover gels for a beautiful transition) Base Gel Super Bond 5ml (the first bonding layer) Premium Milky White 5ml (first white layer) & Cover Marshmellow 5ml and Cover Fibre Rosé 5ml (second makeup layer),  LuxSchulpe Milky Rosé 5ml ( third coloured makeup layer which conceals the transition again) 5 files (to file your nail in form before the modellage and to correct the form after  the build-up gel) 500 Zeletten + 100ml Cleaner (to remove the sweat layer of the build up gel before filing and to clean the tools and brushes) Secret Beyond Shine Milky 12ml (to seal your nail and get a perfect shine) 10ml nail oil  Propusher (to push away the cuticles) 100 tips in a box+ 7g tip glue  UV/LED combination lamp Complete your nail set for a perfectly lasting modellage with a cutter and the matching cuticle bits + Abtragebits to be able to file down the model after 4 weeks again comfortably.

JUSTNAILS  Premium Starter Set - for perfect and long-lasting nails With this high-quality set, you get all the gels and accessories you need for your nail modelling in one click. Application  Prepare the nail thoroughly with the buffer, push back the cuticle with the propusher and file the nail into shape and work sufficiently the cuticle and the nail bed. The nail bed must be completely matt and filed with the buffer! (*For optimal durability, a cuticle nipper to remove dead cuticles and cuticle bit + cutter is recommended) If they want to extend the nails with the nail tips, they spread the Ultra Prep Dehydrator on the nails and let it air dry until the nail is matte again. Now choose the right tips and smear some glue on the inner surface of the tip. Now stick the tips on the nail tip and hold it for 5-7 seconds so that it can dry.  File the tip now in the right shape you want to have and wear them also the transition carefully with the supplied files down so that there is NO noticeable transitions from the natural nail to the tip. Take good care of the natural nail and do not file it! Matt the tip completely with a file, no shiny spots should be visible. Use our in the set included Ultra Prep Dehydrator and afterwards the Primer Ultra Double Bond Primer, let them air dry. If you have glued tips, apply these liquids ONLY to the natural nail and not to the tip. Prime the nail + tip with a thin layer of Base Gel Super Bond and let this gel harden in the lamp Now build up the nail with one of the included build up gels. Decide while working which of the two consistencies you like better. Both gels can also be combined or mixed. You also have a cover gel included in the set with which you can model the structure. Accordingly, you can skip the step with the color gel application and come directly afterwards to the sealing. For the beginning you can also build up the structure in 2 layers and let it harden in between in the lamp, make sure that you do NOT remove the sticky sweat layer in between. Let the gel cure in the lamp (LED:60sec./ UV:120sec) when you are done with the build up and then remove the sweating layer with a cleaner.  Now you can file the nails into shape, remove the filing dust with a dust brush and coat the nail with a color gel with the supplied brush. Make sure that you always work in thinner layers rather than thicker so that no unsightly deformations form and paint the colors from top to bottom. Make sure that you also apply enough pressure at the bottom of the nail so that not too much of the color gel is deposited there, because if you apply several layers, the nail could become too thick at this point. Let the color gel now harden and do NOT remove the sweating layer but seal now in a thin layer with the Secret Beyond Shine sealant. Let this also in the lamp to the end now twice as long harden.  Let the nails cool down and do not touch them for at least 1 minute. Later they can apply nail oil on the cuticle and already your perfect nails are ready Scope of Delivery: Buffer (to roughen your nail bed, (*For best durability, a cuticle bit + cutter is recommended)) Ultra Prep - Dehydrator 12ml (to degrease your nail optimally) Primer Ultra Double Bond Primer 12ml (to prepare your nail perfectly for the modellage) Brush (to apply the gels) Base Gel Super Bond 5ml (the first bonding layer) Fibre Extreme Intense 15ml & Alround Phase Gel 15ml (building gel) Cover Gel 15ml (can be used as a build up gel for a natural look) 3 bestselling color gels randomly selected Secret Beyond Shine 15ml 5 Files (To file your nail into shape before modelling and to correct the shape after  the build up gel) 500 Cell Pads + 100ml Cleaner (to remove the sweat layer of the build up gel before filing and to clean the tools and brushes) 10ml nail oil  Propusher (to push away the cuticles) 100 tips in a box + 7g tip glue  UV/LED combination lamp Complete your nail set for a perfectly lasting modeling with a cutter and the matching cuticle bits + Abtragebits to the modeling after 4 weeks to file down again comfortably.

JUSTNAILS  Babyboomer Set - for the perfect natural look With this high quality set you get all the gels you need for a perfect baby boomer in one click. Application  Prepare the nail thoroughly and work sufficiently on the cuticle and nail bed Use our Ultra Prep Dehydrator and Primer Ultra Double Bond Primer, allow them to air dry Prime the nail with a thin layer of Base Gel Super Bond and let this gel harden in the lamp Spread the Premium Milky White French Gel included in the set onto the nail tip and blend it out with the Ombre Brush included in the set so that it is fainter towards the top and leave it to cure in the lamp. Use one of the cover gels included in the set and apply the gel from the top downwards with the ombre brush, making sure that the gel becomes weaker towards the middle, thus creating a smooth gradient between the white tip and the cover gel. Let the Cover Gel harden in the lamp. Now model a build-up with the Lux Sculpe Milky Rosé. Through the lightly colored 1-phase gel, the so-called ombre effect is again concealed and even more beautiful. Let the gel cure in the lamp (LED:60sec./ UV:120sec.) and then remove the sweating layer with a cleaner.  Now you can file the nails into shape, remove the filing dust with a dust brush and seal the nail with the Milky Finish Gel included in the set.  Now leave the nails in the lamp for twice as long to finish and your perfect baby boomer nails are ready. SET L: 15ml Premium Milky White 5ml Cover Fibre Glace - Rose Intense 5ml Cover Fibre Glace - Sleek Blush 5ml Cover Powder Marshmellow 15ml LUX Sculpe Milky Rosè 15ml Secret Beyond Shine - Milky Premium Ombre Brush SET M: 5ml Premium Milky White 5ml Cover Fibre Glace - Rose Intense 5ml Cover Fibre Glace - Sleek Blush 5ml Cover Powder Marshmellow 5ml LUX Sculpe Milky Rosè 15ml Secret Beyond Shine - Milky Premium Ombre Brush SET S: 5ml Premium Milky White 5ml Cover Fibre Glace - Rose Intense 5ml LUX Sculpe Milky Rosè 15ml Secret Beyond Shine - Milky Premium Ombre Brush

JUSTNAILS  Premium Starter Set  S - for perfect and long-lasting nails With this high quality set you get in one click all the gels and all the accessories you need for your nail modeling. Application  Prepare the nail thoroughly with the buffer, push back the cuticle with the propusher and file the nail into shape and work sufficiently the cuticle and the nail bed. The nail bed must be completely matt and filed with the buffer! (*For optimal durability, a cuticle nipper to remove dead cuticles and cuticle bit + cutter is recommended) If they want to extend the nails with the nail tips, they spread the Ultra Prep Dehydrator on the nails and let it air dry until the nail is matte again. Now choose the right tips and smear some glue on the inner surface of the tip. Now stick the tips on the nail tip and hold it for 5-7 seconds so that it can dry.  File the tip now in the right shape you want to have and wear them also the transition carefully with the supplied files down so that there is NO noticeable transitions from the natural nail to the tip. Take good care of the natural nail and do not file it! Matt the tip completely with a file, no shiny spots should be visible. Use our in the set included Ultra Prep Dehydrator and afterwards the Primer Ultra Double Bond Primer, let them air dry. If you have glued tips, apply these liquids ONLY to the natural nail and not to the tip. Prime the nail + tip with a thin layer of Base Gel Super Bond and let this gel harden in the lamp Now build up the nail with one of the included build up gels. Decide while working which of the two consistencies you like better. Both gels can also be combined or mixed. For the beginning you can also build up the build-up in 2 layers and let it harden in between in the lamp, make sure that you do NOT remove the sticky sweat layer in between. Let the gel harden in the lamp (LED:60sec./ UV:120sec) when you are done with the build-up and then remove the sweating layer with a cleaner.  Now you can file the nails into shape, remove the filing dust with a dust brush and coat the nail with a color gel with the supplied brush. Make sure that you always work in thinner layers rather than thicker so that no unsightly deformations form and paint the colors from top to bottom. Make sure that you also apply enough pressure at the bottom of the nail so that not too much of the color gel is deposited there, because if you apply several layers, the nail could become too thick at this point. Let the color gel now harden and do NOT remove the sweating layer but seal now in a thin layer with the Secret Beyond Shine sealant. Let this also in the lamp to the end now twice as long harden.  Let the nails cool down and do not touch them for at least 1 minute. Later they can apply nail oil on the cuticle and already your perfect nails are ready Scope of Delivery: Buffer (to roughen your nail bed, (*For best durability, a cuticle bit + cutter is recommended)) Ultra Prep - Dehydrator 12ml (to degrease your nail optimally) Primer Ultra Double Bond Primer 12ml (to prepare your nail perfectly for the modellage) Brush (to apply the gels) Base Gel Super Bond 5ml (the first bonding layer) 2x NDE 1 phase gels 1 bestseller color gels randomly selected 5 files (to file your nail before the modeling in form and after  the building gel to correct the form) 500 Zeletten + 100ml Cleaner (to remove the sweating layer of the build up gel before filing and to clean the tools and brushes) 10ml nail oil  Propusher (to push away the cuticles) 100 tips in a box + 7g tip glue  UV/LED combination lamp Complete your nail set for a perfectly lasting modeling with a cutter and the matching cuticle bits + Abtragebits to the modeling after 4 weeks to file down again comfortably.

JUSTNAILS Premium Gel Starter Set Everything you need for your beautiful nails