JUSTNAILS Polish Gel Soak-Off Colour  Highest quality on highest level! Our new polish colours which can be combined with our Rubber Base gels are especially developed for adhesion problems and are up to the biggest and most stressful studio everyday life. No more filing is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running and highly opaque consistency, it is very easy and in the fastest possible time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Application Flexi Builder Polish Series: Prepare the nail as usual and remove the cuticle. Use our Ulra Prep Dehydrator to degrease the nails and also the Easy of Prep for easier removal after the wearing time. Let both liquids air dry for about 20 seconds. Now you can use the Flexi Builder or Flexi Cover to create a light thin build up and coat the nail tips very well with it. No additional base gel is necessary! Let the Flexi Gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you can cure one after the other.  Now proceed by not removing the sweat layer but either painting a JustNails Polish Soak-off Gel Color like this one on it or leave the nails as they are now. Finally you just have to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nail, just buff the top sealant layer well enough with a buffer to allow the remover liquid to penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, wrap them around your finger and leave it on for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a Pro-Pusher or Rosewood Stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Flexi Builder series easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Colour  Highest quality at the highest level! Our new Polish colours to be combined with our Rubber Base gels are especially developed for adhesion problems and are up to the biggest and most stressful studio daily routine. No more filing is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running and highly opaque consistency, it is very easy and in the fastest possible time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Application Flexi Builder Polish Series: Prepare the nail as usual and remove the cuticle. Use our Ulra Prep Dehydrator to degrease the nails and additionally the Easy of Prep to remove the cuticles after the wearing time. Let both liquids air dry for about 20 seconds. Now you can use the Flexi Builder or Flexi Cover to create a light thin build up and coat the nail tips very well with it. No additional base gel is necessary! Let the Flexi Gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you can cure one after the other.  Now proceed by not removing the sweat layer but either painting a JustNails Polish Soak-off Gel Color like this one on it or leave the nails as they are now. Finally you just have to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nail, just buff the top sealant layer well enough with a buffer to allow the remover liquid to penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, wrap them around your finger and leave it on for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a Pro-Pusher or Rosewood Stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Flexi Builder series easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

For easy and convenient removal of the varnish.  Simply soak a cellte with Remover, place on the nail and clip onto the finger. Leave to act as usual. The clips are quick to attach and provide a better grip. They are reusable and easy to clean. Content:10 clips made of plastic

JUSTNAILS Polish Gel Soak-Off Colour  Highest quality at the highest level! Our new Polish colours to be combined with our Rubber Base gels are especially developed for adhesion problems and are up to the biggest and most stressful studio daily routine. No more filing is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running and highly opaque consistency, it is very easy and in the fastest possible time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Application Flexi Builder Polish Series: Prepare the nail as usual and remove the cuticle. Use our Ulra Prep Dehydrator to degrease the nails and additionally the Easy of Prep to remove the cuticles after the wearing time. Let both liquids air dry for about 20 seconds. Now you can use the Flexi Builder or Flexi Cover to create a light thin build up and coat the nail tips very well with it. No additional base gel is necessary! Let the Flexi Gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you can cure one after the other.  Now proceed by not removing the sweat layer but either painting a JustNails Polish Soak-off Gel color like this one on it or leave the nails as they are now. Finally you just have to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nail, just buff the top sealant layer well enough with a buffer to allow the remover liquid to penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, wrap them around your finger and leave it on for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a Pro-Pusher or Rosewood Stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Flexi Builder series easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Soak-Off Flash Lights Gel Flashing lights. Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a smoky version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors. Which version is visible depends only on the light and its intensity!   Millions of diamond particles sealed in a designer bottle. Seemingly dark, muted colors open their wings with some light that ignites a new sparkling life in them!   Directions: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a cutter, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can also be combined independently with acrylic or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. Apply a layer of the selected color and cure in the LED lamp (The process can be repeated. Make sure to work in thin layers if you want to layer the gel).   Finally, cover the nail with a finishing gel of your choice and cure it again in the lamp. Shake well before use.    Properties: thin-medium viscosity easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Soak-Off Flash Lights Gel Flashing lights. Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a smoky version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors. Which version is visible depends only on the light and its intensity!   Millions of diamond particles sealed in a designer bottle. Seemingly dark, muted colors open their wings with some light that ignites a new sparkling life in them!   Directions: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a cutter, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can also be combined independently with acrylic or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. Apply a layer of the selected color and cure in the LED lamp (The process can be repeated. Make sure to work in thin layers if you want to layer the gel).   Finally, cover the nail with a finishing gel of your choice and cure it again in the lamp. Shake well before use.    Properties: thin-medium viscosity easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Soak-Off Flash Lights Gel Flashing lights. Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a smoky version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors. Which version is visible depends only on the light and its intensity!   Millions of diamond particles sealed in a designer bottle. Seemingly dark, muted colors open their wings with some light that ignites a new sparkling life in them!   Directions: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a cutter, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can also be combined independently with acrylic or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. Apply a layer of the selected color and cure in the LED lamp (The process can be repeated. Make sure to work in thin layers if you want to layer the gel).   Finally, cover the nail with a finishing gel of your choice and cure it again in the lamp. Shake well before use.    Properties: thin-medium viscosity easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Soak-Off Flash Lights Gel Flashing lights. Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a smoky version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors. Which version is visible depends only on the light and its intensity!   Millions of diamond particles sealed in a designer bottle. Seemingly dark, muted colors open their wings with some light that ignites a new sparkling life in them!   Directions: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a cutter, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can also be combined independently with acrylic or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. Apply a layer of the selected color and cure in the LED lamp (The process can be repeated. Make sure to work in thin layers if you want to layer the gel).   Finally, cover the nail with a finishing gel of your choice and cure it again in the lamp. Shake well before use.    Properties: thin-medium viscosity easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Soak-Off Flash Lights Gel Flashing lights.  Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a smoky version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors. Which version is visible depends only on the light and its intensity!   Millions of diamond particles sealed in a designer bottle. Seemingly dark, muted colors open their wings with some light that ignites a new sparkling life in them!   Directions: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a cutter, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can also be combined independently with acrylic or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. Apply a layer of the selected color and cure in the LED lamp (The process can be repeated. Make sure to work in thin layers if you want to layer the gel).   Finally, cover the nail with a finishing gel of your choice and cure it again in the lamp. Shake well before use.    Properties: thin-medium viscosity easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Glitter  Highest quality at the highest level! Our new Polish colors to be combined with our Rubber Base gels are specially developed for adhesion problems and are up to the biggest and most stressful studio everyday life.... No more filing work is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running away and highly opaque consistency, it is very easy and in schnellsmöglichem time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Glitter gels like this one have no color pigments in them. This means the result on the nail will not cover the entire surface. You could work in 2 layers or put a matching base color on the nail beforehand and cure. All Shellac colors and glitter can also be used on normal gel and acrylic!   Application Shellac Builder Series: Prepare the nail as usual and remove the cuticle. Use our Ultra Prep Dehydrator to degrease the nails and the Primer Ultra Double Bond for the durability of the modellage. Let both liquids dry in the air for about 20 seconds. Now you can with a Shellac Builder Gel from this category: Shellac Builder/Cover indicate a light thin build-up and coat the nail tips very well with it. No additional base gel is necessary. Let the gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you let harden one after the other.  Continue by not removing the sweat layer but either applying a JustNails Polish Soak-off Gel Color like this one or leave the nails as they are now. Finally, you just need to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nails, you just need to roughen the top sealant layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover liquid onto the specially made Remover Clips, wrap them around your finger and let it sit for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a pro pusher or rosewood stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Builder Shellac series easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Glitter  Highest quality at the highest level! Our new Polish colors to be combined with our Rubber Base gels are specially developed for adhesion problems and are up to the biggest and most stressful studio everyday life.... No more filing work is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running away and highly opaque consistency, it is very easy and in schnellsmöglichem time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Glitter gels like this one have no color pigments in them. This means the result on the nail will not cover the entire surface. You could work in 2 layers or put a matching base color on the nail beforehand and cure. All Shellac colors and glitter can also be used on normal gel and acrylic!   Application Shellac Builder Series: Prepare the nail as usual and remove the cuticle. Use our Ultra Prep Dehydrator to degrease the nails and the Primer Ultra Double Bond for the durability of the modellage. Let both liquids dry in the air for about 20 seconds. Now you can with a Shellac Builder Gel from this category: Shellac Builder/Cover indicate a light thin build-up and coat the nail tips very well with it. No additional base gel is necessary. Let the gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you let harden one after the other.  Continue by not removing the sweat layer but either applying a JustNails Polish Soak-off Gel Color like this one or leave the nails as they are now. Finally, you just need to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nails, you just need to roughen the top sealant layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover liquid onto the specially made Remover Clips, wrap them around your finger and let it sit for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a pro pusher or rosewood stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Builder Shellac series easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Glitter  Highest quality at the highest level! Our new Polish colors to be combined with our Rubber Base gels are specially developed for adhesion problems and are up to the biggest and most stressful studio everyday life.... No more filing work is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running away and highly opaque consistency, it is very easy and in schnellsmöglichem time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Glitter gels like this one have no color pigments in them. This means the result on the nail will not cover the entire surface. You could work in 2 layers or put a matching base color on the nail beforehand and cure. All Shellac colors and glitter can also be used on normal gel and acrylic!   Application Shellac Builder Series: Prepare the nail as usual and remove the cuticle. Use our Ultra Prep Dehydrator to degrease the nails and the Primer Ultra Double Bond for the durability of the modellage. Let both liquids dry in the air for about 20 seconds. Now you can with a Shellac Builder Gel from this category: Shellac Builder/Cover indicate a light thin build-up and coat the nail tips very well with it. No additional base gel is necessary. Let the gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you let harden one after the other.  Continue by not removing the sweat layer but either applying a JustNails Polish Soak-off Gel Color like this one or leave the nails as they are now. Finally, you just need to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nails, you just need to roughen the top sealant layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover liquid onto the specially made Remover Clips, wrap them around your finger and let it sit for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a pro pusher or rosewood stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Builder Shellac series easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Glitter  Highest quality at the highest level! Our new Polish colors to be combined with our Rubber Base gels are specially developed for adhesion problems and are up to the biggest and most stressful studio everyday life.... No more filing work is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running away and highly opaque consistency, it is very easy and in schnellsmöglichem time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Glitter gels like this one have no color pigments in them. This means the result on the nail will not cover the entire surface. You could work in 2 layers or put a matching base color on the nail beforehand and cure. All Shellac colors and glitter can also be used on normal gel and acrylic!   Application Shellac Builder Series: Prepare the nail as usual and remove the cuticle. Use our Ultra Prep Dehydrator to degrease the nails and the Primer Ultra Double Bond for the durability of the modellage. Let both liquids dry in the air for about 20 seconds. Now you can with a Shellac Builder Gel from this category: Shellac Builder/Cover indicate a light thin build-up and coat the nail tips very well with it. No additional base gel is necessary. Let the gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you let harden one after the other.  Continue by not removing the sweat layer but either applying a JustNails Polish Soak-off Gel Color like this one or leave the nails as they are now. Finally, you just need to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nails, you just need to roughen the top sealant layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover liquid onto the specially made Remover Clips, wrap them around your finger and let it sit for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a pro pusher or rosewood stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Builder Shellac series easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Glitter  Highest quality at the highest level! Our new Polish colors to be combined with our Rubber Base gels are specially developed for adhesion problems and are up to the biggest and most stressful studio everyday life.... No more filing work is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running away and highly opaque consistency, it is very easy and in schnellsmöglichem time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Glitter gels like this one have no color pigments in them. This means the result on the nail will not cover the entire surface. You could work in 2 layers or put a matching base color on the nail beforehand and cure. All Shellac colors and glitter can also be used on normal gel and acrylic!   Application Shellac Builder Series: Prepare the nail as usual and remove the cuticle. Use our Ultra Prep Dehydrator to degrease the nails and the Primer Ultra Double Bond for the durability of the modellage. Let both liquids dry in the air for about 20 seconds. Now you can with a Shellac Builder Gel from this category: Shellac Builder/Cover indicate a light thin build-up and coat the nail tips very well with it. No additional base gel is necessary. Let the gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you let harden one after the other.  Continue by not removing the sweat layer but either applying a JustNails Polish Soak-off Gel Color like this one or leave the nails as they are now. Finally, you just need to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nails, you just need to roughen the top sealant layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover liquid onto the specially made Remover Clips, wrap them around your finger and let it sit for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a pro pusher or rosewood stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Builder Shellac series easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Glitter  Highest quality at the highest level! Our new Polish colors to be combined with our Rubber Base gels are specially developed for adhesion problems and are up to the biggest and most stressful studio everyday life.... No more filing work is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running away and highly opaque consistency, it is very easy and in schnellsmöglichem time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Glitter gels like this one have no color pigments in them. This means the result on the nail will not cover the entire surface. You could work in 2 layers or put a matching base color on the nail beforehand and cure. All Shellac colors and glitter can also be used on normal gel and acrylic!   Application Shellac Builder Series: Prepare the nail as usual and remove the cuticle. Use our Ultra Prep Dehydrator to degrease the nails and the Primer Ultra Double Bond for the durability of the modellage. Let both liquids dry in the air for about 20 seconds. Now you can with a Shellac Builder Gel from this category: Shellac Builder/Cover indicate a light thin build-up and coat the nail tips very well with it. No additional base gel is necessary. Let the gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you let harden one after the other.  Continue by not removing the sweat layer but either applying a JustNails Polish Soak-off Gel Color like this one or leave the nails as they are now. Finally, you just need to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nails, you just need to roughen the top sealant layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover liquid onto the specially made Remover Clips, wrap them around your finger and let it sit for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a pro pusher or rosewood stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Builder Shellac series easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Glitter  Highest quality at the highest level! Our new Polish colors to be combined with our Rubber Base gels are specially developed for adhesion problems and are up to the biggest and most stressful studio everyday life.... No more filing work is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running away and highly opaque consistency, it is very easy and in schnellsmöglichem time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Glitter gels like this one have no color pigments in them. This means the result on the nail will not cover the entire surface. You could work in 2 layers or put a matching base color on the nail beforehand and cure. All Shellac colors and glitter can also be used on normal gel and acrylic!   Application Shellac Builder Series: Prepare the nail as usual and remove the cuticle. Use our Ultra Prep Dehydrator to degrease the nails and the Primer Ultra Double Bond for the durability of the modellage. Let both liquids dry in the air for about 20 seconds. Now you can with a Shellac Builder Gel from this category: Shellac Builder/Cover indicate a light thin build-up and coat the nail tips very well with it. No additional base gel is necessary. Let the gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you let harden one after the other.  Continue by not removing the sweat layer but either applying a JustNails Polish Soak-off Gel Color like this one or leave the nails as they are now. Finally, you just need to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nails, you just need to roughen the top sealant layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover liquid onto the specially made Remover Clips, wrap them around your finger and let it sit for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a pro pusher or rosewood stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Builder Shellac series easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Colour  Highest quality at the highest level! Our new Polish colours to be combined with our Rubber Base gels are especially developed for adhesion problems and are up to the biggest and most stressful studio daily routine. No more filing is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running and highly opaque consistency, it is very easy and in the fastest possible time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Application Flexi Builder Polish Series: Prepare the nail as usual and remove the cuticle. Use our Ulra Prep Dehydrator to degrease the nails and additionally the Easy of Prep to remove the cuticles after the wearing time. Let both liquids air dry for about 20 seconds. Now you can use the Flexi Builder or Flexi Cover to create a light thin build up and coat the nail tips very well with it. No additional base gel is necessary! Let the Flexi Gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you can cure one after the other.  Now proceed by not removing the sweat layer but either painting a JustNails Polish Soak-off Gel Color like this one on it or leave the nails as they are now. Finally you just have to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nail, just buff the top sealant layer well enough with a buffer to allow the remover liquid to penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, wrap them around your finger and leave it on for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a Pro-Pusher or Rosewood Stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Flexi Builder series easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Colour  Highest quality at the highest level! Our new Polish colours to be combined with our Rubber Base gels are especially developed for adhesion problems and are up to the biggest and most stressful studio daily routine. No more filing is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running and highly opaque consistency, it is very easy and in the fastest possible time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Application Flexi Builder Polish Series: Prepare the nail as usual and remove the cuticle. Use our Ulra Prep Dehydrator to degrease the nails and additionally the Easy of Prep to remove the cuticles after the wearing time. Let both liquids air dry for about 20 seconds. Now you can use the Flexi Builder or Flexi Cover to create a light thin build up and coat the nail tips very well with it. No additional base gel is necessary! Let the Flexi Gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you can cure one after the other.  Now proceed by not removing the sweat layer but either painting a JustNails Polish Soak-off Gel Color like this one on it or leave the nails as they are now. Finally you just have to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nail, just buff the top sealant layer well enough with a buffer to allow the remover liquid to penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, wrap them around your finger and leave it on for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a Pro-Pusher or Rosewood Stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Flexi Builder series easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Colour  Highest quality at the highest level! Our new Polish colours to be combined with our Rubber Base gels are especially developed for adhesion problems and are up to the biggest and most stressful studio daily routine. No more filing is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running and highly opaque consistency, it is very easy and in the fastest possible time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Application Flexi Builder Polish Series: Prepare the nail as usual and remove the cuticle. Use our Ulra Prep Dehydrator to degrease the nails and additionally the Easy of Prep to remove the cuticles after the wearing time. Let both liquids air dry for about 20 seconds. Now you can use the Flexi Builder or Flexi Cover to create a light thin build up and coat the nail tips very well with it. No additional base gel is necessary! Let the Flexi Gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you can cure one after the other.  Now proceed by not removing the sweat layer but either painting a JustNails Polish Soak-off Gel Color like this one on it or leave the nails as they are now. Finally you just have to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nail, just buff the top sealant layer well enough with a buffer to allow the remover liquid to penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, wrap them around your finger and leave it on for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a Pro-Pusher or Rosewood Stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Flexi Builder series easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Soak-Off Flash Lights Gel Flashing lights.  Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a smoky version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors. Which version is visible depends only on the light and its intensity!   Millions of diamond particles sealed in a designer bottle. Seemingly dark, muted colors open their wings with some light that ignites a new sparkling life in them!   Directions: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a cutter, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can also be combined independently with acrylic or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. Apply a layer of the selected color and cure in the LED lamp (The process can be repeated. Make sure to work in thin layers if you want to layer the gel).   Finally, cover the nail with a finishing gel of your choice and cure it again in the lamp. Shake well before use.    Properties: thin-medium viscosity easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Soak-Off Flash Lights Gel Flashing lights.  Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a smoky version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors. Which version is visible depends only on the light and its intensity!   Millions of diamond particles sealed in a designer bottle. Seemingly dark, muted colors open their wings with some light that ignites a new sparkling life in them!   Directions: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a cutter, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can also be combined independently with acrylic or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. Apply a layer of the selected color and cure in the LED lamp (The process can be repeated. Make sure to work in thin layers if you want to layer the gel).   Finally, cover the nail with a finishing gel of your choice and cure it again in the lamp. Shake well before use.    Properties: thin-medium viscosity easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Soak-Off Flash Lights Gel Flashing lights.  Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a smoky version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors. Which version is visible depends only on the light and its intensity!   Millions of diamond particles sealed in a designer bottle. Seemingly dark, muted colors open their wings with some light that ignites a new sparkling life in them!   Directions: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a cutter, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can also be combined independently with acrylic or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. Apply a layer of the selected color and cure in the LED lamp (The process can be repeated. Make sure to work in thin layers if you want to layer the gel).   Finally, cover the nail with a finishing gel of your choice and cure it again in the lamp. Shake well before use.    Properties: thin-medium viscosity easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Soak-Off Flash Lights Gel Flashing lights.  Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a smoky version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors. Which version is visible depends only on the light and its intensity!   Millions of diamond particles sealed in a designer bottle. Seemingly dark, muted colors open their wings with some light that ignites a new sparkling life in them!   Directions: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a cutter, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can also be combined independently with acrylic or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. Apply a layer of the selected color and cure in the LED lamp (The process can be repeated. Make sure to work in thin layers if you want to layer the gel).   Finally, cover the nail with a finishing gel of your choice and cure it again in the lamp. Shake well before use.    Properties: thin-medium viscosity easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JustNails Pearl Cat Eye effect gel in the highest quality Our Pearl Cat Eye effect gels conjure up a fascinating and unique effect on your nails. Due to the medium viscosity consistency, the gel can be applied easily, quickly and easily without running. A mixture of a clear base and extremely high-quality magnetic color and glitter pigments ensure perfect coverage even when applied thinly. No stirring necessary & no settling of pigments. Application: To achieve the best result, use a matching color base and let it cure in the lamp. Brush the Cat Eye Gel onto the color gel and, to get a cat eye effect, simply hold our magnet over the nail for 3-4 seconds. If you are not satisfied with the result and want to try again, just repaint the gel again. You do not have to clean away the "used" layer. The particles will spread again as they did in the beginning. Let the gel harden immediately afterwards (UV/LED: 60 Sec.) and seal it at the end. You can also achieve a beautiful effect without a magnet by simply painting the gel on a black or any other base color and just let it cure. For the ideal protection we recommend our  Secret Beyond Shine to seal..