JUSTNAILS - Secret Beyond Shine UV Sealer - For a perfect and long-lasting shineOur Secret Beyond Shine is the absolute favorite of our customersLong shine, scratch resistance, an easy application and impact resistance characterize our finishing gel. Thanks to the combination of a perfect thin to medium viscosity, a honey effect and the flexibility after hardening, an easy, fast and perfect application is possible. Now brand NEW in our rose gold bottles. Application:Apply the sealer thinly to the nail as the last step after colour application and cure for at least LED: 120 sec / UV: 180 sec. Does NOT leave an inhibition layer!  So that the finish gel shines perfectly, please note the following: After curing, please let the nails cool down before you touch the nail with cleaner, oil or your fingers. Otherwise the gel could become dull in places.  Do not use "low heat" mode on LED/UV lamps when sealing. Generally NO cleaner is needed as the gel has no sweat layer after curing. Special properties: Honey effect Shock and scratch resistant In a noble and practical brush bottle Pleasant consistency Perfectly suitable for working in pigments  

JUSTNAILS PRO RUBBER BASE BuilderOLD NAME: CREAMY NUDES Phenomenal 2in1 product! Also perfect for extremely thin and bendy nails with extreme adhesion problems. A high-coverage and dense Rubber Builder Gel  with the consistency and properties of a Shellac/Hybrid Gel, which also has the properties of a soft and building gel. Thanks to it, the Shellac/Hybrid manicure is durable, perfectly matches the natural nail and provides a beautiful color! The product leaves a sticky dispersion layer that allows the applied color to adhere perfectly. This builder base is dedicated to weak nails - it is extremely durable and carefully coats the nail, creates an excellent foundation for nail regeneration and growth and protects against new mechanical injuries. Thanks to its high flexibility, it does not crack or crumble.  PROPERTIES: Exceptional ease of application = does not run into the nail edges Highly pigmented  Possibility to extend the nail by up to approx. 1 cm C-curve build-up possible Excellent protection against mechanical damage Regeneration of thin and brittle nails, even with unevenness and chipping No lifting and exceptional durability The best choice for single application or to enhance the color gel The curing time depends on the quality and power of the lamp LED lamp: 45 sec, LED/UV lamp 60 sec Content: 15ml APPLICATION: Apply a very thin layer of the base to the carefully prepared nail plate (do not cure yet, the layer serves as a "contact layer" for the next thicker layer). Then use more to build up the curve and the stress point. After curing, you can apply the color immediately or remove the sweat layer with a cleaner and smooth out any unevenness with a buffer or file. You can follow the next steps as with a normal "Shellac / hybrid styling" or paint the nail plate with conventional colored polish and then seal it. For sealing, we recommend our bestseller: Secret Beyond Shine Keep away from children and fire. Avoid contact with the eyes. In case of contact, rinse eyes with cold water. Consult your doctor. For professional use. 

JustNails color gels 5D effect gel in the highest quality Our 5D effect gels conjure up a fascinating and unique effect on your nails. Due to the medium viscosity consistency, the gel can be applied easily, quickly and easily without running. A mixture of a clear base and extremely high quality magnetic color and glitter pigments ensure perfect coverage even when applied thinly. No stirring necessary & no settling of pigments. Application: To achieve the best result, use a matching color base and let it cure in the lamp. Spread the 5D Cat Eye Gel on the color gel and hold our Cat Eye Magnet (the smaller round end) around the nail to get a 5D effect. Never go into the middle of the nail or you will get a normal 3D cat eye effect again.  If you want a 3D cat eye effect, just hold the large square side of the magnet over the nail for 3-4 seconds. If you are not happy with the result and want to try again, just repaint the gel again. You do not have to clean away the "used" layer. The particles will spread again as they did in the beginning. Let the gel harden immediately afterwards (UV/LED: 60 Sec.) and seal it at the end. You can also achieve a beautiful effect without a magnet by simply painting the gel on a black or any other base color and just let it cure. For the ideal protection we recommend our  Secret Beyond Shine to seal..

JUSTNAILS Polish Holo Flake Soak-Off Flash Lights Gels Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a sparkling version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors under artificial/flash light. Which version is visible depends only on the light and intensity! Millions of diamond particles and small flakes sealed in a designer bottle.    Instructions for use: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a bur, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can of course also be combined with acrylic, gel or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. The flash gels need a base color that matches the same shade. You can also apply a black or white base if it matches the color. Apply the color of your choice and let it cure. Now apply a layer of Flash Light gels and cure in the LED lamp (the process can be repeated). Make sure to work in thin layers if you want to layer the gel). Finally, coat the nail with a finishing gel of your choice and cure it again in the lamp to finish.    Properties: medium viscosity easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Gel Soak-Off Colour  Highest quality at the highest level! Our new Polish colours to be combined with our Rubber Base gels are especially developed for adhesion problems and are up to the biggest and most stressful studio daily routine. No more filing is needed and it is perfect for short to medium length nails! Due to the perfect self-smoothing but not running and highly opaque consistency, it is very easy and in the fastest possible time to model the nails! An excellent durability that has been extensively tested by our studio partners and found to be perfect!  Application Flexi Builder Polish Series: Prepare the nail as usual and remove the cuticle. Use our Ulra Prep Dehydrator to degrease the nails and additionally the Easy of Prep to remove the cuticles after the wearing time. Let both liquids air dry for about 20 seconds. Now you can use the Flexi Builder or Flexi Cover to create a light thin build up and coat the nail tips very well with it. No additional base gel is necessary! Let the Flexi Gel dry in the UV/LED lamp. For better stability, you can also work with 2 very thin layers that you can cure one after the other.  Now proceed by not removing the sweat layer but either painting a JustNails Polish Soak-off Gel color like this one on it or leave the nails as they are now. Finally you just have to seal the nail with a sealing gel of your choice. We recommend our best seller Secret Beyond Shine to our customers! To remove the nail, just buff the top sealant layer well enough with a buffer to allow the remover liquid to penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, wrap them around your finger and leave it on for 15 minutes. Take off the Remover Pad and carefully remove the gel residue with a Pro-Pusher or Rosewood Stick.  Properties: medium viscosity-thick viscosity perfect for short to medium length nails with our Flexi Builder series easy application leaves inhibition layer Cure at: UV/LED - 60 sec | UV - 120 sec Made in Europe - developed, produced and filled according to cosmetic regulations

JUSTNAILS LIQUID COVER Thin-layer semi-transparent cover gel - perfect for full cover tips & delicate baby boomer looks The new JUSTNAILS LIQUID COVER is a thin to medium viscosity, semi-transparent cover gel with maximum flexibility - developed for full cover systems that do not require build-up modeling. In contrast to classic thick-viscosity cover gels, which automatically add color during build-up, Liquid Cover can be applied in 1-2 wafer-thin layers - without destroying the delicate shape of full-cover tips. Ideal for baby boomer, French or delicate nude looks with an even, naturally opaque finish.   Thanks to its flexible properties, it adheres reliably to normal gel nails as well as to regular Fullcover Tips and our ShapeX Tips.  PROPERTIES: Thin to medium viscosity, semi-transparent texture for streak-free application Coverage as desired: 1-2 thin coats are sufficient No additional build-up necessary (on Fullcover Tips) Flexible and unbreakable - also ideal for movable artificial nail systems such as Shellac Gentle, natural finish for French or baby boomer designs Adheres reliably to gel models and tip surfaces Curing: UV/LED 60 sec. APPLICATION:   The gel is applied like a color gel with a brush in 1-2 thin layers. Allow each layer to cure individually. It is perfect as a color finish for full cover tips or as an even cover base under nail art designs. Then seal the result with a top gel of your choice - e.g. our Secret Beyond Shine.Notes: Keep away from children and fire. Avoid contact with the eyes. In case of contact with eyes, rinse thoroughly with cold water and seek medical advice if necessary. For professional use only.

JUSTNAILS Hybrid base EXCELLENT BASE EXCELLENT BASE is an antidote for very soft and damaged nails. A revolutionary base based on a unique formula that combines the properties of hybrid polish, soft gel and building gel. Perfect consistency that allows for gentle lengthening (up to 1 cm) and building of the nail plate. The exceptionally tacky dispersion layer allows the applied color to adhere perfectly, which ensures the durability of the manicure up to at least 4 weeks. Thanks to the Cool Cure curing technology, the base does not cause discomfort and burning when curing in the lamp.   The EXCELLENT BASE: Creates the basis for the regeneration and growth of the nail Thanks to its high dispersion, it acts like a double-sided Velcro fastener The possibility of building up the nail The possibility of delicate nail extension up to 1 cm Fills cavities in the nail plate Innovative Cool-Cure formula (no burning in the lamp) High flexibility Does not break Does not crumble Does not turn yellow Easy to apply Does not run into the nail edges   APPLICATION: Apply a very thin layer of the base to the carefully prepared nail plate (do not cure yet, the layer serves as a "contact layer" for the next thicker layer). Then use more to build up the curve and stress point. After curing, you can apply the paint immediately or remove the dispersion with a cleaner and smooth out any imperfections with a block. You can follow the next steps as for a usual "Shellac / Hybrid Styling" or paint the nail plate with conventional color lacquer and seal it afterwards. For sealing, we recommend our bestseller: Secret Beyond Shine   Keep away from children and fire. Avoid contact with eyes. In case of contact, rinse eyes with cold water. Consult your doctor. For professional use.    

JUSTNAILS Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticles. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This allows you to easily smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. If possible, always leave a thin layer of gel on the nail when removing it completely. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Europe - developed, produced and bottled according to cosmetics regulations

JUSTNAILS Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticles. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This allows you to easily smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. If possible, always leave a thin layer of gel on the nail when removing it completely. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Europe - developed, produced and bottled according to cosmetics regulations

For easy and convenient removal of the varnish.  Simply soak a cellte with Remover, place on the nail and clip onto the finger. Leave to act as usual. The clips are quick to attach and provide a better grip. They are reusable and easy to clean. Content:10 clips made of plastic

JUSTNAILS X-Bond Base Gel Soak-Off Die innovation für extrem "schwierige" Naturnägel mit einer Tendenz zu häufigen Liftings und Produktabhebungen. Speziell ausgewählte Inhaltsstoffe dieses Gels verbessern die Haftung der Modellage bei sehr nassen/feuchten Naturnägeln oder bei Menschen mit hormonellen Problemen, was zu einer Instabilität der Maniküre führt (hauptsächlich die Schilddrüse). X-Bond Base hat eine dünne Konsistenz und ist damit eine ideale Grundlage für alle Nagelverlängerungssysteme, nicht nur für Hybrid-, sondern auch für Acryl- und Gelverfahren. Wenn Sie eine harte Nagelplatte haben, können Sie diese erfolgreich als Grundlage für eine regelmäßige Hybrid-Maniküre verwenden! Denken Sie jedoch daran, dass dieses Gel nicht zum Aufbauen oder Härten des Nagels dient, sondern nur als Grundlage für weitere Aktivitäten. Garantiert eine perfekte Haftung der Produkte und Erhöhung der Haltbarkeit! Dank der flexiblen Formel ermöglicht es den Nägeln, im natürlichen Rhythmus zu arbeiten und sich den natürlichen Mechanismen anzupassen. Die Base brauchen Sie nur ganz dünn aufzutragen. Bei einem dickeren Auftrag färbt sich der Nagel gelb   Eigenschaften: Innovative Control Curing Formel (kein Brennen beim Aushärten in der Lampe) Perfekter Halt Hohe Flexibilität Widerstand gegen Lufteinschlüsse und Produktanhebung Selbstnivellierende Formel Vergilbungsbeständigkeit Perfekt für Hybridlack, Acrylgel und Gele für Nägel mit Neigung zu Liftings. LED / UV-Formel Es erfordert keine Verwendung einer Grundierung Aushärten bei: UV/LED - 60 Sek | UV - 120 Sek Made in Europa - entwickelt, produziert und abgefüllt nach Kosmetikverordnung

JUSTNAILS - HEMA FREE Finish Gel Top No Wipe - For Allergy Sufferers Finally a sealer now also for allergy sufferers without HEMA! Long shine, scratch resistance, impact resistance and a foolproof application characterize our finish gel. Thanks to the combination of a perfect medium to thick viscosity, a perfect honey effect and the flexibility after curing, an easy, fast and perfect application is possible. Application:Apply the sealer thinly on the nail as the last step after the color application and cure at least LED: 120 sec / UV: 180 sec. Does NOT leave an inhibition layer!  To ensure that the finishing gel shines perfectly, please note the following: After curing, please let the nails cool down before you touch the nail with cleaner, oil or your fingers. Otherwise, the gel could become dull in places.  Do not use "low heat" mode on LED/UV lamps when sealing. Generally NO cleaner is needed as the gel has no sweating layer after curing.   Special properties: Honey effect Shock and scratch resistant In a noble and practical brush bottle Pleasant consistency No sticky layer HEMA FREE  

JUSTNAILS PRO RUBBER BASE Builder Phenomenal 2in1 product Perfect even for extremely thin and flexible nails with extreme adhesion difficulties. A dense Rubber Builder Gel  with the consistency and properties of a Shellac/Hybrid gel, which also has the properties of a soft and building gel. Thanks to it, the Shellac/Hybrid manicure is durable, perfectly matches the natural nail and provides a beautiful color! The product leaves a sticky dispersion layer. This builder base is dedicated to weak nails - it is extremely durable and carefully wraps the nail, creates an excellent foundation for nail regeneration and growth and protects against new mechanical injuries. Thanks to its high flexibility, it does not crack or crumble.   PROPERTIES: Exceptional comfort of use Fine glitter included The possibility of lengthening the nail up to about 5mm Possibility of building the C-curve Excellent protection against mechanical injuries Regeneration of thin and brittle nails, even with unevenness and chipping No lifting and exceptional durability The best choice for single application Curing time depends on the quality and power of the lamp. LED lamp: 45 sec, LED/UV lamp 60 sec   APPLICATION:   Apply a very thin layer of the base to the carefully prepared nail plate (do not cure yet, the layer serves as a "contact layer" for the next thicker layer). Then use more to build up the curve and stress point. After curing, you can either seal the gel immediately or remove the sweat layer with a cleaner and smooth out any imperfections with a buffer or file. You can also follow the next steps as for a usual "Shellac / Hybrid Styling" or paint the nail plate with conventional color lacquer and seal it afterwards. For the sealing we recommend our bestseller: Secret Beyond Shine   Keep away from children and fire. Avoid contact with eyes. In case of contact, rinse eyes with cold water. Consult your doctor.   For professional use.

JUSTNAILS Polish Holo Flake Soak-Off Flash Lights Gels Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a sparkling version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors under artificial/flash light. Which version is visible depends only on the light and intensity! Millions of diamond particles and small flakes sealed in a designer bottle.    Instructions for use: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a bur, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can of course also be combined with acrylic, gel or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. The flash gels need a base color that matches the same shade. You can also apply a black or white base if it matches the color. Apply the color of your choice and let it cure. Now apply a layer of Flash Light gels and cure in the LED lamp (the process can be repeated). Make sure to work in thin layers if you want to layer the gel). Finally, coat the nail with a finishing gel of your choice and cure it again in the lamp to finish.    Properties: medium viscosity easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JustNails color gels 5D effect gel in the highest quality Our 5D effect gels conjure up a fascinating and unique effect on your nails. Due to the medium viscosity consistency, the gel can be applied easily, quickly and easily without running. A mixture of a clear base and extremely high quality magnetic color and glitter pigments ensure perfect coverage even when applied thinly. No stirring necessary & no settling of pigments. Application: To achieve the best result, use a matching color base and let it cure in the lamp. Spread the 5D Cat Eye Gel on the color gel and hold our Cat Eye Magnet (the smaller round end) around the nail to get a 5D effect. Never go into the middle of the nail or you will get a normal 3D cat eye effect again.  If you want a 3D cat eye effect, just hold the large square side of the magnet over the nail for 3-4 seconds. If you are not happy with the result and want to try again, just repaint the gel again. You do not have to clean away the "used" layer. The particles will spread again as they did in the beginning. Let the gel harden immediately afterwards (UV/LED: 60 Sec.) and seal it at the end. You can also achieve a beautiful effect without a magnet by simply painting the gel on a black or any other base color and just let it cure. For the ideal protection we recommend our  Secret Beyond Shine to seal..

JustNails color gels 5D effect gel in the highest quality Our 5D effect gels conjure up a fascinating and unique effect on your nails. Due to the medium viscosity consistency, the gel can be applied easily, quickly and easily without running. A mixture of a clear base and extremely high quality magnetic color and glitter pigments ensure perfect coverage even when applied thinly. No stirring necessary & no settling of pigments. Application: To achieve the best result, use a matching color base and let it cure in the lamp. Spread the 5D Cat Eye Gel on the color gel and hold our Cat Eye Magnet (the smaller round end) around the nail to get a 5D effect. Never go into the middle of the nail or you will get a normal 3D cat eye effect again.  If you want a 3D cat eye effect, just hold the large square side of the magnet over the nail for 3-4 seconds. If you are not happy with the result and want to try again, just repaint the gel again. You do not have to clean away the "used" layer. The particles will spread again as they did in the beginning. Let the gel harden immediately afterwards (UV/LED: 60 Sec.) and seal it at the end. You can also achieve a beautiful effect without a magnet by simply painting the gel on a black or any other base color and just let it cure. For the ideal protection we recommend our  Secret Beyond Shine to seal..

JUSTNAILS Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticles. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This allows you to easily smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. If possible, always leave a thin layer of gel on the nail when removing it completely. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Europe - developed, produced and bottled according to cosmetics regulations

JUSTNAILS LIQUID COVER Thin-layer semi-transparent cover gel - perfect for full cover tips & delicate baby boomer looks The new JUSTNAILS LIQUID COVER is a thin to medium viscosity, semi-transparent cover gel with maximum flexibility - developed for full cover systems that do not require build-up modeling. In contrast to classic thick-viscosity cover gels, which automatically add color during build-up, Liquid Cover can be applied in 1-2 wafer-thin layers - without destroying the delicate shape of full-cover tips. Ideal for baby boomer, French or delicate nude looks with an even, naturally opaque finish.   Thanks to its flexible properties, it adheres reliably to normal gel nails as well as to regular Fullcover Tips and our ShapeX Tips.  PROPERTIES: Thin to medium viscosity, semi-transparent texture for streak-free application Coverage as desired: 1-2 thin coats are sufficient No additional build-up necessary (on Fullcover Tips) Flexible and unbreakable - also ideal for movable artificial nail systems such as Shellac Gentle, natural finish for French or baby boomer designs Adheres reliably to gel models and tip surfaces Curing: UV/LED 60 sec. APPLICATION:   The gel is applied like a color gel with a brush in 1-2 thin layers. Allow each layer to cure individually. It is perfect as a color finish for full cover tips or as an even cover base under nail art designs. Then seal the result with a top gel of your choice - e.g. our Secret Beyond Shine.Notes: Keep away from children and fire. Avoid contact with the eyes. In case of contact with eyes, rinse thoroughly with cold water and seek medical advice if necessary. For professional use only.

JUSTNAILS Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticles. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This allows you to easily smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. If possible, always leave a thin layer of gel on the nail when removing it completely. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Europe - developed, produced and bottled according to cosmetics regulations

JUSTNAILS PRO Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS Pro Polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Can be used onShellac, gel, polygel and acrylics Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticle. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This makes it easy to smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. Always leave a thin layer of gel on the nail when removing it completely, if possible. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Germany - developed, produced and bottled in accordance with the Cosmetics Ordinance

 JustNails Premium Cleaner A cleaner is an indispensable part of nail modelling with UV gels. With our JustNails Cleaner the sweating layer can be removed in a gentle and antibacterial way. Thus, a germ formation is prevented from the beginning Properties: Liquid easy application Removes inhibition layer Made in Germany - developed, produced and bottled according to cosmetic regulations     Properties Liquideasy to useRemoves inhibition layer Made in Germany - developed, produced and filled according to cosmetic regulations

JUSTNAILS Polish Holo Flake Soak-Off Flash Lights Gels Everything begins with light ... and ends with light! Made according to a modern formula. The collection of sophisticated colors from JUSTNAILS hides two faces. The first is a sparkling version of the color with fine stardust. The second, in turn, shows millions of sparkling silver particles dipped in beautiful colors under artificial/flash light. Which version is visible depends only on the light and intensity! Millions of diamond particles and small flakes sealed in a designer bottle.    Instructions for use: Prepare nail plate (Remove visible and invisible cuticles, e.g. with a cutter, buffer or with a file. Then mat the nail plate with a bur, buffer or file). Degrease the nail plate, apply a thin layer of an adhesive gel or Rubber Base (can of course also be combined with acrylic, gel or polygel systems) and harden. Now build up your nail with a gel of your choice, let it harden and file it into shape. The flash gels need a base color that matches the same shade. You can also apply a black or white base if it matches the color. Apply the color of your choice and let it cure. Now apply a layer of Flash Light gels and cure in the LED lamp (the process can be repeated). Make sure to work in thin layers if you want to layer the gel). Finally, coat the nail with a finishing gel of your choice and cure it again in the lamp to finish.    Properties: medium viscosity easy application leaves inhibition layer Curing at: UV/LED - 60 sec | UV - 120 sec developed, produced and filled according to cosmetic regulations

JUSTNAILS - Connect Basegel Extreme Bond convinces with its perfect adhesion properties for all nail types and also problem nails The new Connector improves the adhesion of gel and Shellac on the nail plate. A mixture of the best adhesive properties available on the market give this product unbeatable adhesion to the natural nail plate, while the chemical nature of the sweating layer ensures perfect interlayer adhesion. The strength after curing is based on the cohesive power. Even extreme lifting caused by a greasy nail surface can be prevented with Base Gel Super Bond. for extreme adhesion problems No heat development, no liftings Application:  Prepare natural nail Base Gel  thinly on the natural nail  and massage in Apply build-up gel 

JustNails color gels 5D effect gel in the highest quality Our 5D effect gels conjure up a fascinating and unique effect on your nails. Due to the medium viscosity consistency, the gel can be applied easily, quickly and easily without running. A mixture of a clear base and extremely high quality magnetic color and glitter pigments ensure perfect coverage even when applied thinly. No stirring necessary & no settling of pigments. Application: To achieve the best result, use a matching color base and let it cure in the lamp. Spread the 5D Cat Eye Gel on the color gel and hold our Cat Eye Magnet (the smaller round end) around the nail to get a 5D effect. Never go into the middle of the nail or you will get a normal 3D cat eye effect again.  If you want a 3D cat eye effect, just hold the large square side of the magnet over the nail for 3-4 seconds. If you are not happy with the result and want to try again, just repaint the gel again. You do not have to clean away the "used" layer. The particles will spread again as they did in the beginning. Let the gel harden immediately afterwards (UV/LED: 60 Sec.) and seal it at the end. You can also achieve a beautiful effect without a magnet by simply painting the gel on a black or any other base color and just let it cure. For the ideal protection we recommend our  Secret Beyond Shine to seal..