JUSTNAILS Mini Silicone Tool for Rubbing in Pigments Perfect shine starts with the right tool. With the JUSTNAILS silicone tool, you can apply pigments effortlessly, precisely, and evenly into your top coat – for an intense, mirror-like finish without any product waste. Adjustable Firmness for Maximum Control What makes this tool special: The silicone tip is movable. You can slide it further out or push it in, allowing you to customize the firmness depending on your needs. Pulled further out → softer & more flexible Pushed further in → firmer & more stable For rubbing in pigments, we recommend pushing the silicone piece as far in as possible. This makes the tip firmer, allowing you to apply more pressure and “polish” the pigment perfectly onto the nail. The result: an intense chrome or mirror effect with maximum coverage. Your Benefits at a Glance Ideal for rubbing in chrome, mirror, and effect pigments Adjustable firmness thanks to the movable silicone tip Smooth, clean application No unnecessary product loss Reusable & easy to clean

JUSTNAILS 78W Professional UV/LED Lamp Ombre Purple Pink No. 9 Maximum performance for the highest demandsThe JUSTNAILS 78W UV/LED lamp no. 9 was specially developed for professional studio use and impresses with its extreme curing performance and sophisticated details for a perfect working experience. Thanks to its high output and optimum light reflection, it cures even highly pigmented or thick-viscosity gels reliably, quickly and completely - even in hard-to-reach areas. 360° light reflection - no gel remains uncuredThe heart of this lamp is its innovative design: an integrated mirror base and a mirrored ceiling on the inside ensure even light distribution from all sides. As a result, the UV/LED light is optimally reflected and surrounds the entire nail - even from below! The result: flawlessly cured nail designs without shadows or uncured edges. Uncompromising studio quality without a batteryDeliberately designed without a rechargeable battery , the lamp relies on a stable mains power supply - for consistently strong performance without charging breaks or loss of power. Ideal for studios where reliability and efficiency are required. ATTENTION! Please switch off the power source after you have finished working with the device.   The automatic sensor is always ready and wears out when the device is plugged in, even if the device is not in use. This also significantly reduces the service life of the sensor.    Further highlights 78 watts of power - for ultra-fast curing 4 timer settings (10s, 30s, 60s, 90s) - flexible for any type of modeling Automatic infrared sensor - for convenient, touch-free work Removable mirror base - easy to clean and perfect for pedicures Optimized LED arrangement - uniform illumination without blind spots   Technical data: Power: 78W LEDs: 39 high-power LEDs Wavelengths: 365 & 405 nm - suitable for all UV and LED gels Voltage: 220-240V ~ 50/60Hz Dimensions: 25 x 20 x 9 cm Pink UV light

Premium JUSTNAILS S10 router machine incl. premium brushless handpiece Professional 85 W cutter machine for manicures and pedicures, with infinitely variable speed control up to 35,000 revolutions per minute. With the help of this device you can smooth and polish your nails, remove dead skin cells and artificial nails. The most important advantage of the buffing machine is its power -  it will never let you down, even during an extremely heavy pedicure. Standard cutters with a shaft diameter of 2.35 mm are suitable for the milling machine.  + Incl. silicone dust protection tool. JUSTNAILS ONLY guarantees the handpieces if the silicone dust protection is ALWAYS used. The filing dust gets into the handpiece without the protection and leads to a defect in the long term.   THE HANDPIECE Our handpiece has an innovative brushless motor that works without sliding contacts. This means that there is no mechanical connection between the rotor and the stator, instead the rotor uses magnets and the stator is wrapped. This results in a number of advantages: Precise speed control: thanks to the electronic control, the speed of the motor can be set precisely, which enables more efficient use. Hardly any noticeable vibration Very quiet Handpiece weight: 165g Consistent performance: The brushless motor offers better power transmission and therefore runs more smoothly and efficiently. Durability: Without the friction that occurs in brushed motors, the motor heats up less and lasts longer. If the handpiece is not engaged, the display flashes with the error code: "E1" Of course, the handpiece also has a twist & lock mechanism. Turn the clamp of the handpiece until you hear a click. The Twist & Lock mechanism enables a quick and convenient cutter bit change.   Technical data: Supply voltage: 220V / 50/60 Hz Output voltage: DC 12V / 4A Maximum power: 85W Revolutions: 0-35000 rpm Handpiece weight: 165g With right/left rotation Incl. basic starter cutter bits (we recommend high-quality cutter bits from our range) WITHOUT FOOTPEDAL!

JUSTNAILS Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticles. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This allows you to easily smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. If possible, always leave a thin layer of gel on the nail when removing it completely. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Europe - developed, produced and bottled according to cosmetics regulations

JUSTNAILS Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticles. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This allows you to easily smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. If possible, always leave a thin layer of gel on the nail when removing it completely. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Europe - developed, produced and bottled according to cosmetics regulations

In collaboration with Japanese nail artist nail fumi, we’ve created the perfect color application brush. With an oval shape that fits into any cuticle, this brush allows for perfect and even strokes of color. The sturdy handle and synthetic bristles ensure the brush will have a long life in your nail kit. It is sure to become a staple brush that you will be constantly reaching for.   Product specs: Product Dimension: 140mm Hair length: 8mm  Handle material: wood Hair material: synthetic hair   How to clean brushes?The recommended method for cleaning our Artiste brushes is to use a base gel to saturate and wipe off. For best results, use the Aprés Base Gelcoat. Another alternative is to use any brush cleaner that's acetone free. We do not recommend cleaning brushes with acetone as it can damage the fine bristles.

The Gel-X® Tip Swatches assists in discovering and identifying the perfect Gel-X® Tip for your client. Featuring a wide variety of styles, lengths and shapes, giving you an advantage to improve the nail application process with speed and ease. Crafted from sturdy acrylic, these swatches resist bending and breaking, ensuring long-term reliability. Each swatch is clearly labeled with the tip shape, length, and size, making it simple to find the perfect fit and style.   Caution It is recommended to clean Gel-X Tip Swatches with alcohol only

The Aprés Cone Bit - Fine - 3.1 mm is a slim precision tool for precise detail work Thanks to its fine grit and narrow, tapered shape, it is perfect for hard-to-reach areas on the cuticle, for a smooth, even finish after a Gel-X® application or for roughening the underside of Gel-X® tips to improve adhesion. Whether you want to refine your application or prepare like a pro, this small but mighty bit is an essential tool for any nail designer. Precise tip design - The 3.1 mm cone shape is ideal for tight corners and cuticle areas. Smooth, flush finish - Ideal for refining Gel-X® enhancements after application. Improved tip adhesion - The underside of the Gel-X® tips are gently sanded to achieve stronger adhesion. Fine grit control - Ensures gentle sanding and precise, careful preparation. A versatile must-have - Perfect for professionals and DIY enthusiasts who value accuracy and versatility.  

JUSTNAILS Premium T-Shirt  Fair and sustainable produced in Germany Fabric density: 150g/m² Material: 100% cotton - elegant and slightly stretchy in premium quality    

JUSTNAILS Polarlight Pigments give nails an intense chrome mirror look inspired by the shimmering colors of the Northern Lights. Depending on the base color and light reflection, the pigment shifts in fascinating nuances and creates unique effects every time. Due to the EU microplastics ban, classic plastic based pigments had to be removed from the market. Our new Polarlight Pigments are the modern answer to this change. They are made from organic raw materials and are not affected by the EU microplastics regulation. This makes them a safe and future proof alternative for studios and professionals. The pigments can be combined with all base colors. Whether light, dark or colorful, the effect looks different and special every time. Innovative Packaging The packaging has been completely redesigned and developed specifically for this type of pigment. The jar is equipped with a flexible mesh that allows precise and clean product pickup. Using a silicone tool, exactly the amount needed can be taken. No spilling, no dust, no product waste. Even when the jar is turned upside down, the pigment stays securely inside. The mesh reliably prevents the pigment from falling out and ensures maximum control during application. Important Application Notice These pigments are exclusively designed to be used with a silicone tool. A classic applicator cannot be used with this type of jar. The matching silicone tool is available separately in our shop. The packaging includes the jar only. No applicator is included. Application Apply the desired color and cure. Seal with a no wipe top coat and cure for approx. 40 seconds in a UV LED lamp. A lamp with at least 36 watts, ideally 48 watts, is required. We recommend JUSTNAILS Secret Beyond Shine for pigment application. The top coat should still be warm after curing. Rub the pigment thoroughly and firmly onto the nail using a silicone tool. Pick up more pigment repeatedly. In this case, more is better than less, as it makes the rubbing process easier. Carefully remove excess pigment around and on the nail using a dust brush. Seal again. For extra long wear, we recommend sealing the free edge thinly with a top coat with inhibition layer first and then applying the desired top coat. This helps protect the tips for daily wear and keeps the mirror effect flawless for weeks. Content 0.3 g Application Notice This product is intended exclusively for use on already artificially enhanced fingernails and or nail tips.

JUSTNAILS 78W Professional UV/LED Lamp Ombre Purple Pink No. 8 Maximum performance for the highest demandsThe JUSTNAILS 78W UV/LED lamp no. 8 was specially developed for professional studio use and impresses with its extreme curing performance and sophisticated details for a perfect working experience. Thanks to its high output and optimum light reflection, it cures even highly pigmented or thick-viscosity gels reliably, quickly and completely - even in hard-to-reach areas. 360° light reflection - no gel remains uncuredThe heart of this lamp is its innovative design: an integrated mirror base and a mirrored ceiling on the inside ensure even light distribution from all sides. As a result, the UV/LED light is optimally reflected and surrounds the entire nail - even from below! The result: flawlessly cured nail designs without shadows or uncured edges. Uncompromising studio quality without a batteryDeliberately designed without a rechargeable battery , the lamp relies on a stable mains power supply - for consistently strong performance without charging breaks or loss of power. Ideal for studios where reliability and efficiency are required. ATTENTION! Please switch off the power source after you have finished working with the device.   The automatic sensor is always ready and wears out when the device is plugged in, even if the device is not in use. This also significantly reduces the service life of the sensor.    Further highlights 78 watts of power - for ultra-fast curing 4 timer settings (10s, 30s, 60s, 90s) - flexible for any type of modeling Automatic infrared sensor - for convenient, touch-free work Removable mirror base - easy to clean and perfect for pedicures Optimized LED arrangement - uniform illumination without blind spots   Technical data: Power: 78W LEDs: 39 high-power LEDs Wavelengths: 365 & 405 nm - suitable for all UV and LED gels Voltage: 220-240V ~ 50/60Hz Dimensions: 25 x 20 x 9 cm Pink UV light Color: Color gradient outside purple + pink

JUSTNAILS Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticles. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This allows you to easily smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. If possible, always leave a thin layer of gel on the nail when removing it completely. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Europe - developed, produced and bottled according to cosmetics regulations

JUSTNAILS PRO Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS Pro Polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Can be used onShellac, gel, polygel and acrylics Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticle. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This makes it easy to smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. Always leave a thin layer of gel on the nail when removing it completely, if possible. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Germany - developed, produced and bottled in accordance with the Cosmetics Ordinance

The Aprés Angle Brush is the perfect brush for one stroke method and crisp French lines. With its angled and compact shape, it can easily glide one stroke designs or be used to draw clean curves and corners. Manufactured with PBT fibers, this brush will be able to withstand constant and regular use without warping or falling out. 8mm PBT bristle WHAT’S INCLUDED 1x Angle Brush 1x Silicone Cap CLEANING ART BRUSHES The recommended method for cleaning Aprés Art Brushes is to use Aprés Base Gelcoat to saturate the bristles and then clean with a lint-free wipe. Another alternative is to use any brush cleaner that is acetone free. We do not recommend cleaning brushes with acetone as it can damage the fine bristles. STORING ART BRUSHES Complete your nail station and keep your brushes organized and protected while maintaining their shape and longevity with the Aprés Art Brush Holder.  

The Gel-X® Tip Swatches assists in discovering and identifying the perfect Gel-X® Tip for your client. Featuring a wide variety of styles, lengths and shapes, giving you an advantage to improve the nail application process with speed and ease. Crafted from sturdy acrylic, these swatches resist bending and breaking, ensuring long-term reliability. Each swatch is clearly labeled with the tip shape, length, and size, making it simple to find the perfect fit and style.   Caution It is recommended to clean Gel-X Tip Swatches with alcohol only

The Aprés Straight Cut 5-in-1 Bit - Extra Coarse (Gold) is a real powerhouse for the quick and thorough removal of polish, gels and other surfaces. Thanks to its sharp, multidirectional teeth and extra coarse grit, this bit effortlessly removes Gel-X® tips, gel nail polish, overlays, acrylics and even product residue after acetone baths. The 3/32" universal bit is designed for efficiency and durability and is an indispensable tool for any nail designer who wants to create a flawless base effortlessly and without force. It removes material effectively but is also designed to be precise.   Strong removal power - Extra coarse grit effortlessly removes Gel-X®, acrylic, hard gel and nail polish. 5-in-1 multi-function grind - Versatile, straight grind for optimal control and adaptation to your technique. Fast, clean product removal - Removes stubborn residues such as gel residues after acetone baths. Universal 3/32" fit - Compatible with most professional and DIY electric nail files. Golden finish, professional quality - Durable and stylish with the performance nail designers trust.  

JUSTNAILS Premium Sweatshirt Unisex  Our JUSTNAILS Premium Sweatshirt combines timeless style with maximum comfort and true studio-ready durability. Whether for everyday wear, in the salon, or on the go, this sweatshirt is made for everyone who loves high-quality, modern, and long-lasting essentials.Model Anna (162cm tall, normally wears size S for regular-fitting clothes): is wearing this hoodie in size M as shown in the product image. The especially durable blended fabric feels wonderfully soft and features a very smooth outer surface as well as a brushed, cozy inner lining that keeps you warm even on long days. The fashionable, slightly fitted cut creates a modern look without feeling restrictive. Premium details such as the flatlock decorative stitching on the shoulders, armholes, and cuffs add subtle accents and highlight the high-quality craftsmanship. The reinforced, color-matching neck tape provides additional stability and wearing comfort. Thanks to its pre-shrunk treatment and anti-pilling finish, the sweatshirt maintains its shape and stays looking fresh even after frequent washing. It is washable up to 60 °C, suitable for tumble drying, and even designed for industrial laundering, making it perfect for professional use. Highlights at a Glance Especially durable, soft blended fabric Brushed inner lining for extra comfort Modern, slightly fitted unisex fit Flatlock decorative seams as a stylish detail Elastic 2x2 rib-knit cuffs and hem Pre-shrunk and anti-pilling finish Washable up to 60 °C, tumble-dryer safe, and industrial laundry suitable Material & Quality Fabric weight: 320 g/m² Material: 80% cotton / 20% polyester

JUSTNAILS Polarlight Pigments give nails an intense chrome mirror look inspired by the shimmering colors of the Northern Lights. Depending on the base color and light reflection, the pigment shifts in fascinating nuances and creates unique effects every time. Due to the EU microplastics ban, classic plastic based pigments had to be removed from the market. Our new Polarlight Pigments are the modern answer to this change. They are made from organic raw materials and are not affected by the EU microplastics regulation. This makes them a safe and future proof alternative for studios and professionals. The pigments can be combined with all base colors. Whether light, dark or colorful, the effect looks different and special every time. Innovative Packaging The packaging has been completely redesigned and developed specifically for this type of pigment. The jar is equipped with a flexible mesh that allows precise and clean product pickup. Using a silicone tool, exactly the amount needed can be taken. No spilling, no dust, no product waste. Even when the jar is turned upside down, the pigment stays securely inside. The mesh reliably prevents the pigment from falling out and ensures maximum control during application. Important Application Notice These pigments are exclusively designed to be used with a silicone tool. A classic applicator cannot be used with this type of jar. The matching silicone tool is available separately in our shop. The packaging includes the jar only. No applicator is included. Application Apply the desired color and cure. Seal with a no wipe top coat and cure for approx. 40 seconds in a UV LED lamp. A lamp with at least 36 watts, ideally 48 watts, is required. We recommend JUSTNAILS Secret Beyond Shine for pigment application. The top coat should still be warm after curing. Rub the pigment thoroughly and firmly onto the nail using a silicone tool. Pick up more pigment repeatedly. In this case, more is better than less, as it makes the rubbing process easier. Carefully remove excess pigment around and on the nail using a dust brush. Seal again. For extra long wear, we recommend sealing the free edge thinly with a top coat with inhibition layer first and then applying the desired top coat. This helps protect the tips for daily wear and keeps the mirror effect flawless for weeks. Content 0.3 g Application Notice This product is intended exclusively for use on already artificially enhanced fingernails and or nail tips.

JUSTNAILS 78W Professional UV/LED Lamp Ombre Purple Pink No. 9 Maximum performance for the highest demandsThe JUSTNAILS 78W UV/LED lamp no. 9 was specially developed for professional studio use and impresses with its extreme curing performance and sophisticated details for a perfect working experience. Thanks to its high output and optimum light reflection, it cures even highly pigmented or thick-viscosity gels reliably, quickly and completely - even in hard-to-reach areas. 360° light reflection - no gel remains uncuredThe heart of this lamp is its innovative design: an integrated mirror base and a mirrored ceiling on the inside ensure even light distribution from all sides. As a result, the UV/LED light is optimally reflected and surrounds the entire nail - even from below! The result: flawlessly cured nail designs without shadows or uncured edges. Uncompromising studio quality without a batteryDeliberately designed without a rechargeable battery , the lamp relies on a stable mains power supply - for consistently strong performance without charging breaks or loss of power. Ideal for studios where reliability and efficiency are required. ATTENTION! Please switch off the power source after you have finished working with the device.   The automatic sensor is always ready and wears out when the device is plugged in, even if the device is not in use. This also significantly reduces the service life of the sensor.    Further highlights 78 watts of power - for ultra-fast curing 4 timer settings (10s, 30s, 60s, 90s) - flexible for any type of modeling Automatic infrared sensor - for convenient, touch-free work Removable mirror base - easy to clean and perfect for pedicures Optimized LED arrangement - uniform illumination without blind spots   Technical data: Power: 78W LEDs: 39 high-power LEDs Wavelengths: 365 & 405 nm - suitable for all UV and LED gels Voltage: 220-240V ~ 50/60Hz Dimensions: 25 x 20 x 9 cm Pink UV light

JUSTNAILS PRO Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS Pro Polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Can be used onShellac, gel, polygel and acrylics Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticle. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This makes it easy to smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. Always leave a thin layer of gel on the nail when removing it completely, if possible. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Germany - developed, produced and bottled in accordance with the Cosmetics Ordinance

JUSTNAILS PRO Premium Polish Gel Soak-Off Color  Highest quality for professional demands!The JUSTNAILS Pro Polish colors can be perfectly combined with our rubber base gels, hard base gels as well as acrylic and hard gel systems. They have been specially developed for demanding everyday studio use and offer an ideal balance between a self-smoothing consistency that does not run and impressive coverage. Our polish gels impress with: Self-smoothing formula: Perfect results without effort. Highly opaque consistency: Flawless colors with just a few coats. Durability and quality: Tested by experienced studio professionals and rated as ideal. Can be used onShellac, gel, polygel and acrylics Experience first-class durability and perfect results - day after day!   APPLICATION Rubber bases with Polish Color Prepare the nail as usual and remove the cuticle. Now use the Ultra Prep Dehydrator to degrease the nails and then the Ultra Double Bond Primer. Allow both liquids to air dry for approx. 20 seconds one after the other. Now you can start with a bonding gel that is compatible with the soak-off technique. For example, the H-FreeBonder (soak-off compatible), or the Connect Basegel Extreme Bond. Massage the bonding gel into an extremely thin layer and cure it in the lamp. Now you can apply a contact layer to the nail with any builder/rubber base gel that matches the nails. This will make the subsequent build-up easier. Once you have applied the contact layer to the nail (do not harden), you can now apply a light build-up with the rubber/base gel. Make sure the build-up is not too thick and has a nice smooth shape and let the gel cure in the lamp. The aim is not to have to file any more. PRO TIPS:1. Take a thin fineliner brush and use it to lightly stroke out / thin out the build-up in the right directions. This makes it easy to smooth out any unevenness without destroying the shape.  2. Turn the finished finger over once before it goes into the lamp. Allow the gel to flow back into the center of the nail for a few seconds until the structure has the perfect shape.If the gel is also intended for a slight extension, you can now make a small extension on a template in this step, for example. If you are only doing a natural nail enhancement without extension, make sure to coat the nail tips very well so that they do not remain open. This could otherwise lead to lifting.If possible, always avoid filing. If you have to re-file a nail, remove the sweat layer with a tissue and cleaner and make sure that the filing dust does not get onto the sweat layer of the other fingers.  Now continue by not removing the sweat layer (unless you need to re-file the shape), but either apply a Polish Soak-off Gel Color like this one or leave the nails as they are now.PRO TIPS:1. When applying color, always apply a very, very thin layer to the nail first and cure it. This does not necessarily have to cover very well. However, it helps to keep a filigree thin shape by working in 2 very thin layers instead of one slightly thicker one!  2. When applying the color, make sure to slightly increase the pressure on the brush in the nail tip area. Otherwise, unsightly thicker deformations usually occur at the nail tips. Finally, all you have to do is seal the nail with a sealing gel of your choice. We recommend our bestseller Secret Beyond Shine to our customers! There are always two options for removing soak-off gels: 1. Removal with remover liquid: To remove the nails, you only need to roughen the upper sealing layer well enough with a buffer so that the remover liquid can penetrate the lower soak-off gel layers well enough. Drip some of our JustNails Remover Liquid onto the specially made Remover Pads, or a cell tablet that you wrap with aluminum foil when it has been pressed onto the nail. Leave the liquid on for at least 10-15 minutes. You may have to remove the first softened layer and leave it on again for a few minutes until the gel has completely dissolved (depending on the gel, material and thickness of the build-up layer and color layer). Take off the remover pad and carefully remove the gel residue with a pro-pusher or a rosewood stick. Avoid using the remover regularly when filling up. As the natural nail would otherwise have to be matted and roughened again and again with this method, this would be very damaging to the natural nail. 2. Milling with a milling cutter: You need a very good metal milling cutter bit to remove or fill the nails. Always leave a thin layer of gel on the nail when removing it completely, if possible. When filling the nails, remove only 50% of the modeling and model again with a thinner layer on the old modeling. Make sure to remove any liftings and keep them clean.     PROPERTIES medium viscosity-thick viscosity easy, creamy, self-smoothing application leaves an inhibition layer Cures at: UV/LED - 60 sec | UV - 120 sec Content: 10ml Made in Germany - developed, produced and bottled in accordance with the Cosmetics Ordinance

With its densely compacted bristles, the Aprés Flat Round Brush provides precision control for smooth and even application coverage. It is the perfect brush to use when creating a smooth structured base. The Flat Round Brush also provides excellent coverage when applying gel color. Manufactured with PBT fibers, this brush will be able to withstand constant and regular use without warping or falling out. 8mm PBT bristle WHAT’S INCLUDED 1x Flat Round Brush 1x Silicone Cap CLEANING ART BRUSHES The recommended method for cleaning Aprés Art Brushes is to use Aprés Base Gelcoat to saturate the bristles and then clean with a lint-free wipe. Another alternative is to use any brush cleaner that is acetone free. We do not recommend cleaning brushes with acetone as it can damage the fine bristles. STORING ART BRUSHES Complete your nail station and keep your brushes organized and protected while maintaining their shape and longevity with the Aprés Art Brush Holder.

The Gel-X® Tip Swatches assists in discovering and identifying the perfect Gel-X® Tip for your client. Featuring a wide variety of styles, lengths and shapes, giving you an advantage to improve the nail application process with speed and ease. Crafted from sturdy acrylic, these swatches resist bending and breaking, ensuring long-term reliability. Each swatch is clearly labeled with the tip shape, length, and size, making it simple to find the perfect fit and style.   Caution It is recommended to clean Gel-X Tip Swatches with alcohol only

The Aprés Straight Cut 5-in-1 Bit - Medium is an essential tool for all nail designers who want to speed up their soak-off treatmentsThanks to its straight cut and medium grit, this bit quickly and efficiently removes excess material from gel overlays and acrylic extensions, allowing acetone to penetrate faster and dissolve the product more quickly. Designed for control, power and precision, it helps to reduce treatment time without over-filing the material.   5-in-1 straight cut design - For even and controlled removal on a variety of surfaces. Medium grit - Ideal for quick removal of gel, acrylic and build-up. Accelerates removal - Removes excess product, allowing acetone to work more effectively. Not suitable for natural nails - Exclusively for use on nail enhancements and coatings. Indispensable for every nail salon - A reliable attachment for efficient removal and shorter treatment times.