JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system, you now have even more possibilities. You no longer need a gel build-up layer, saving you a huge amount of time. The tip of the nail tips is crafted extra thick so they do not tear during wear, and the rear part is kept extra thin so that it better adapts to the nail. Thanks to the innovative material, which is significantly superior to regular ABS plastic nail tips, it is now possible to dissolve the tips faster, resulting in a completely new application method: APPLICATION MATERIAL: Polymethylmethacrylate - high-quality, stable plastic that is light yet very robust. 1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now fix the tip with several gels. You can choose between: Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube 2. Select the appropriate tips and ideally position them before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel onto the natural nail and cure it in the lamp for 60 seconds. 4. Now apply the ShapeX PREPonto the inside of the tip. The tip's top layer softens so it can optimally bond with the upcoming gel layer. Wait about 1 minute before the next step so the liquid can fully evaporate. 5. Now apply a layer of Xpress Tip Glue Gel onto the softened tip layer and carefully press it onto the already prepared nail with the same gel. Thanks to the gel’s perspiration layer on both sides, everything bonds together optimally. Be careful not to apply too much gel and to avoid pressing it into the nail edges. Press the tip first at the top and then carefully downwards to avoid air bubbles. Do not press too hard to prevent the gel from squeezing out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp for about 10-20 seconds on the finished nail to solidify the gels. If you use a lamp with more than one LED and more than 3W, you can now cure the nail completely. To cure the gel, then place your hand under a UV/LED lamp for 60 seconds to fully cure the gel. Please note that if you do not use a hand lamp beforehand, the tip can shift in a normal lamp because you cannot shape it. If necessary, file the transition from the tip to the nail edge with an appropriate milling bit to hide protruding and angular tip edges and roughen the entire tip to continue with colour application. You can now apply the desired colour gel as usual and cure. Finally, seal with our Secret Beyond Shine top coat. For refills, you can soak the entire nail with remover including the tip, or file off the entire tip together with the underlying gel. When filing, always leave a thin layer of gel on the nail to protect it.

JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system, you now have even more possibilities. You no longer need a gel build-up layer, saving you a huge amount of time. The tip of the nail tips is crafted extra thick so they do not tear during wear, and the rear part is kept extra thin so that it better adapts to the nail. Thanks to the innovative material, which is significantly superior to regular ABS plastic nail tips, it is now possible to dissolve the tips faster, resulting in a completely new application method: APPLICATION MATERIAL: Polymethylmethacrylate - high-quality, stable plastic that is light yet very robust. 1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now fix the tip with several gels. You can choose between: Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube 2. Select the appropriate tips and ideally position them before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel onto the natural nail and cure it in the lamp for 60 seconds. 4. Now apply the ShapeX PREPonto the inside of the tip. The tip's top layer softens so it can optimally bond with the upcoming gel layer. Wait about 1 minute before the next step so the liquid can fully evaporate. 5. Now apply a layer of Xpress Tip Glue Gel onto the softened tip layer and carefully press it onto the already prepared nail with the same gel. Thanks to the gel’s perspiration layer on both sides, everything bonds together optimally. Be careful not to apply too much gel and to avoid pressing it into the nail edges. Press the tip first at the top and then carefully downwards to avoid air bubbles. Do not press too hard to prevent the gel from squeezing out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp for about 10-20 seconds on the finished nail to solidify the gels. If you use a lamp with more than one LED and more than 3W, you can now cure the nail completely. To cure the gel, then place your hand under a UV/LED lamp for 60 seconds to fully cure the gel. Please note that if you do not use a hand lamp beforehand, the tip can shift in a normal lamp because you cannot shape it. If necessary, file the transition from the tip to the nail edge with an appropriate milling bit to hide protruding and angular tip edges and roughen the entire tip to continue with colour application. You can now apply the desired colour gel as usual and cure. Finally, seal with our Secret Beyond Shine top coat. For refills, you can soak the entire nail with remover including the tip, or file off the entire tip together with the underlying gel. When filing, always leave a thin layer of gel on the nail to protect it.

JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system, you now have even more possibilities. You no longer need a gel build-up layer, saving you a huge amount of time. The tip of the nail tips is crafted extra thick so they do not tear during wear, and the rear part is kept extra thin so that it better adapts to the nail. Thanks to the innovative material, which is significantly superior to regular ABS plastic nail tips, it is now possible to dissolve the tips faster, resulting in a completely new application method: APPLICATION MATERIAL: Polymethylmethacrylate - high-quality, stable plastic that is light yet very robust. 1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now fix the tip with several gels. You can choose between: Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube 2. Select the appropriate tips and ideally position them before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel onto the natural nail and cure it in the lamp for 60 seconds. 4. Now apply the ShapeX PREPonto the inside of the tip. The tip's top layer softens so it can optimally bond with the upcoming gel layer. Wait about 1 minute before the next step so the liquid can fully evaporate. 5. Now apply a layer of Xpress Tip Glue Gel onto the softened tip layer and carefully press it onto the already prepared nail with the same gel. Thanks to the gel’s perspiration layer on both sides, everything bonds together optimally. Be careful not to apply too much gel and to avoid pressing it into the nail edges. Press the tip first at the top and then carefully downwards to avoid air bubbles. Do not press too hard to prevent the gel from squeezing out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp for about 10-20 seconds on the finished nail to solidify the gels. If you use a lamp with more than one LED and more than 3W, you can now cure the nail completely. To cure the gel, then place your hand under a UV/LED lamp for 60 seconds to fully cure the gel. Please note that if you do not use a hand lamp beforehand, the tip can shift in a normal lamp because you cannot shape it. If necessary, file the transition from the tip to the nail edge with an appropriate milling bit to hide protruding and angular tip edges and roughen the entire tip to continue with colour application. You can now apply the desired colour gel as usual and cure. Finally, seal with our Secret Beyond Shine top coat. For refills, you can soak the entire nail with remover including the tip, or file off the entire tip together with the underlying gel. When filing, always leave a thin layer of gel on the nail to protect it.