Skip to main content Skip to search Skip to main navigation

JUSTNAILS Premium Press on Polygel Tips Gel Polish Set S2

Studioqualität

Entwickelt für den
professionellen Einsatz

Zuverlässige Haftung

Lang haltbar
Stabil. Sicher

Schneller Versand

24h Versand
innerhalb DE

Vegan

Ohne Tierversuche

JUSTNAILS Premium Fullcover Tip Shellac Starter Set - for extremely fast and beautiful nails

With this high-quality set, you get all the gels and accessories you need for the world-renowned Fullcover Tips nail extension in one click. Perfect for quick at-home nail modeling. Without filing into shape and without much experience, you can easily create beautiful nails that can last up to 4 weeks.

SET APPLICATION:

  • First, select the appropriate sizes of tips and lay them out. Use the buffer and crescent file to thoroughly roughen the inside of the tips. Tips cannot adhere to the nail if they are not roughened!
  • Prepare your nails and carry out a manicure:
  • Wash your hands and preferably disinfect them.
  • File your nails into shape using the finer side of the crescent file.
  • Gently push back your cuticles with a rosewood stick or a pro-pusher and also push them upwards slightly to make removal with cuticle nippers or scissors easier.
  • If necessary, cut away dry and white cuticles very carefully without injuring yourself. Start slowly and work step by step.
  • Now use a buffer to mattify the nail plate and carefully work the edges and corners to remove invisible cuticles. Depending on genetics, there may be a lot or very little invisible cuticle on the nail plate. It must be completely removed for the gel to adhere to the nail. You can also use your crescent file to better reach the edges and corners. If your nails are completely untreated and you are doing them for the first time, feel free to file gently with the fine side of the crescent file WITHOUT pressure on your nail plate. This step is not recommended for damaged nail plates. Professionals use a drill with suitable cuticle bits for natural nail preparation, as it allows 100% perfect access to all edges and, thanks to the fine rotating motion of the diamond bit, damages the nail plate less than a buffer, while still preparing it better as it mattifies evenly and sufficiently.
  • Remove filing dust from your nails and apply Ultra Prep to the entire nail plate. Let it dry for a few seconds and proceed with Ultra Double Bond. Apply this also to the entire nail plate and let it air dry for about 20 seconds. This leaves a sticky layer, please do not touch!
  • Now apply a very, very thin layer of Base Gel Super Bond to the natural nail and cure it in the UV/LED lamp for 60 seconds.
  • Take the polygel from the tube with a spatula, pro-pusher, or rosewood stick, or squeeze it directly into the tip.
    Press the polygel now with a brush moistened with cleaner (it is easiest to work with a polygel brush) suitably into the right tip and distribute the gel as best as possible to the correct position. Press the gel only halfway into the tip. Now place the tip on the nail and move the tip slightly back and forth so that the gummy gel has no bubbles and distributes well. Position the tip preferably at the top of the cuticle and then press it down. Be careful to apply as little pressure as possible so that the gel is not pressed out at the side edges. Once the tip is perfectly placed, the polygel can be cured in the lamp for about 60 seconds.
  • After full curing in the lamp (about 60 seconds), you can roughen the tip with a buffer or file and file off any gel residue that may have been pressed out. TIP: a drill allows a very nice blending at the cuticle transition.
  • Once the tip is roughened all over, you can optionally apply a color gel and cure (60 seconds). If the coverage is still not sufficient, apply another layer after curing in the lamp and cure again. Also spread the color gel thinly towards the tip so that the nails do not look too thick later.
  • Now you can seal the nails with Master Top and cure again for 120 seconds.
  • Wait until the nails are cooled and then only apply cuticle oil to your cuticles.

How to remove the nails after wear time:

You have two removal options:

1. Remove with acetone: Here you must first roughen the top layer well with a file so that the remover liquid can penetrate well. Then wrap your fingers with aluminium foil containing also a pad or kitchen paper soaked with the remover liquid and placed around the nail to be removed. Let it work airtight for about 10-15 minutes and then scrape off the softened gel including the tips again with a rosewood stick or pro-pusher. However, this variant requires constant new manicures with re-roughening of the entire natural nail and is NOT recommended for long-term use.

2. Remove the nails with a file or a drill: Here you must file the gel and the tips down until only a very thin residual layer remains on the nail that does not interfere with a new modelling. Thus you only need to prepare and file the newly grown nail again. The remaining natural nail is still protected by the previous gel and is not injured again by renewed filing. This way your natural nails remain healthy even after years of artificial nails. Be extremely careful not to hurt yourself or damage the nail plate. This variant requires a lot of fingertip feeling and care. With a drill this variant obviously works much faster.

Keep all articles away from children and fire. Avoid eye contact. In case of contact with eyes, rinse with cold water. Consult your doctor.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


_________________________________

*HEMA-free means: Free from HEMA / 2-hydroxyethyl methacrylate / (2-hydroxyethyl) methacrylate → All listed names refer to the same ingredient.

*Di-HEMA-free means: Free from Di-HEMA trimethylhexyl dicarbamate / Di-HEMA-TMHDC / DI-HEMA trimethylhexyl dicarbamate → All listed names refer to the same ingredient.

Bis-HEMA: Only bound HEMA = Allergy risk is reduced, but cannot be completely excluded in cases of an existing pure HEMA allergy (low allergy potential due to polymerized HEMA compounds).


TPO = Our entire shop is TPO-free! ( Trimethylbenzoyl diphenylphosphine oxide, Diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide ) = CAS NUMBER 75980-60-8.

The ingredient we frequently use Di-p-tolyl (2,4,6-trimethylbenzoyl) phosphine oxide is not TPO and is therefore permitted.