Xpress Tip Glue Gel – for attaching Fullcover Tips (Softgel, PMMA or ABS)WARNING:The new TPO-free version has received a formulation change. The Xpress Tip Glue Gel is now thick and viscous.With the Xpress Tip Glue Gel you attach Fullcover Tips quickly, precisely and reliably to the natural nail. Thanks to the practical brush bottle, you can work cleanly without an additional brush. The thick viscous consistency prevents running and allows controlled pressing of the tip.The gel has a specially developed, minimal sweating layer, which differs significantly from conventional sweating layers. This is specifically optimised for use on tips and ensures improved adhesion and particularly long-lasting modelling due to its strongly sticky but not greasy surface.The acid contained in the gel additionally supports adhesion so that the tip optimally bonds with the gel and a stable connection is formed. Due to the thick viscous consistency, you can easily apply the gel to the tip and press it onto the natural nail without running off.ApplicationFor a long-lasting result of up to 4 weeks: Prepare your nails and cuticles as usual and finish the preparation with our Ultra Prep and the Ultra Double Bond Primer. Roughen the inside of the tip lightly with a file, buffer or suitable bit. Alternatively, you can use our ShapeX Prep Liquid. This chemically loosens the surface of the tip and prepares it optimally for gel adhesion. Massage the liquid into the tip for a few seconds and then continue immediately. Important: prepare each tip individually as the tip hardens again after the liquid evaporates. Now apply a small amount of Xpress Tip Glue Gel to the inside of the tip and place it at a 45-degree angle on the cuticle. Gently press the tip down until the gel is evenly distributed and the tip fits perfectly. Cure the tip with a small UV/LED hand lamp for about 15 seconds to prevent shifting. Hold the tip slightly depending on the consistency of the gel to avoid air bubbles. Repeat the process for all nails. Then cure the entire hand for 60 seconds in the UV/LED lamp. Without prior fixing with the hand lamp, the tip can shift in the large lamp. If necessary, file the transition from the tip to the natural nail lightly and even out unevenness. Then roughen the entire tip to prepare the colour application. Apply your desired colour gel. If you like a cover look, you must use so-called "Liquid Cover" from bottles for Fullcover Tips. These are perfectly matched to Fullcover Tips and with just 1-2 thin layers you can create a cover look without modelling a thick layer of cover gel on the nail.Now you can seal the nail: We recommend our Secret Beyond Shine or our HEMA FREE No Wipe sealers. Refill or RemovalFor a refill, you can fill the grown-out area as usual.For complete removal, file off the tip along with the gel underneath. Always leave a thin residual layer of gel on the natural nail to protect it.Features 10 ml in a practical brush bottle Thick viscous Special adhesion-optimised sweating layer Curing: 60 seconds in the UV/LED lamp

Xpress Tip Glue Gel – for attaching Fullcover Tips (Softgel, PMMA or ABS)With Xpress Tip Glue Gel, you can attach Fullcover Tips quickly, precisely and reliably to the natural nail. The gel comes in a jar and can be picked up with a brush, or for experienced users: directly with the tip, applied cleanly and controlled. The thick viscous consistency prevents running and allows you to press the tip precisely. Holding the tip during curing is no longer necessary.The gel features a specially developed, minimal sweating layer that differs significantly from conventional sweating layers. It is specifically optimized for use on tips and ensures improved adhesion through its strongly sticky but non-greasy surface, resulting in especially durable modelling.The acid contained in the gel additionally supports adhesion, so the tip bonds optimally with the gel creating a stable connection. Thanks to the thick viscous consistency, you can easily apply the gel to the tip and press it onto the natural nail without running.ApplicationFor a long-lasting result up to 4 weeks:Prepare your nails and cuticles as usual and finish preparation with our Ultra Prep and Ultra Double Bond Primer.Lightly roughen the inside of the tip using a file, buffer, or suitable bit. Alternatively, you can use our ShapeX Prep Liquid. This chemically softens the tip surface and prepares it optimally for gel adhesion. Massage the fluid into the tip for a few seconds then continue immediately. Important: prepare each tip individually, as the tip hardens again after the fluid evaporates.Using a brush, pick up a small amount of Xpress Tip Glue Gel from the jar and apply it to the inside of the tip. Place the tip at a 45-degree angle at the cuticle and gently press down until the gel spreads evenly and the tip fits perfectly.Cure the tip with a small UV/LED hand lamp for about 15 seconds to prevent slipping. Depending on the gel consistency, hold the tip lightly during curing to avoid air bubbles.Repeat for all nails. Then cure the entire hand for 60 seconds in the UV/LED lamp. Without prior fixation with the hand lamp, the tip may slip in the main lamp.If necessary, slightly file the transition from the tip to the natural nail and even out unevenness. Then roughen the entire tip to prepare for colour application.Now apply your desired colour gel. If you like a cover look, you should use so-called "Liquid Cover" from bottles for Fullcover Tips. These are perfectly matched to Fullcover Tips and you can create a cover look with only 1-2 thin layers without having to model a thick layer of cover gel on the nail.Finally, you can seal the nail: we recommend our Secret Beyond Shine or our HEMA FREE No Wipe sealer.Refill or removalWhen refilling, you can fill the grown-out area as usual.For complete removal, file off the tip together with the underlying gel. Always leave a thin residual layer of gel on the natural nail to protect it.Properties15 ml in jarthick viscous consistencyspecial adhesion-optimized sweating layerCuring: 60 seconds in UV/LED lamp