Xpress Tip Glue Gel - for attaching the JustPress Tips to the nail  ATTENTION: THE NEW TPO free VERSION HAS A RECIPE CHANGE! The Xpress Tip Glue Gel now has a thick viscous consistency!With this new innovative system you now have even more possibilities. The shapes of the JustPress Fullcover Press on Nails are already predefined, matted on and no longer need to be filed from above and below. You no longer need a gel build-up layer and therefore save an enormous amount of time. The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail.  This Xpress gel in the practical brush bottle has NO sweat layer and is therefore ideal for the JustPress tips. Thanks to its thick viscous consistency, it is super easy to apply to the art tip and press onto the natural nail without running off.   Application: For a long-lasting result for up to 4 weeks: Prep your nails and cuticles as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. Now you can apply our special Xpress Tip Glue Gel to the inside of the tip and press it onto the nail. Hold our handy UV/LED hand lamps on it for approx. 10 seconds while you press the tip onto the nail with the other hand, or use our practical Tip Clip Holderto cure the gel and then place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer. With a refill, the entire tip is filed off again together with the underlying gel. Always leave a thin layer of residual gel on the nail to protect it.   Properties: - 10ml in a practical brush bottle - thick viscosity - without sweat layer - curing in the UV/LED lamp:  60 sec.

JUSTNAILS ShapeX Prep - The perfect preparation for ShapeX tips JUSTNAILS ShapeX Prep is the ideal solution for the professional preparation of ShapeX Fullcover Press On Tips. This liquid ensures optimum adhesion by softening the inside of the tips and thus enabling a perfect bond with the gel. Application: Treat the inside of the tip with ShapeX Prep Select the appropriate tip. Apply a thin, even layer of ShapeX Prep to the inside of the tip. wait 1 minute to allow the liquid to evaporate completely. Attach the tip Apply a thin layer of Xpress Tip Glue Gel to the prepared nail plate and cure for 60 seconds. Apply a thin layer of the gel to the inside of the tip treated with ShapeX Prep Inside of the tip treated with ShapeX Prep. Carefully press the tip onto the nail - start at the tip and then slowly slide down to avoid air bubbles. Fix with a UV/LED hand lamp (10-20 seconds), then cure completely in a UV/LED lamp for 60 seconds. Finishing & sealing If necessary, gently file the transition to the natural nail. Lightly roughen the entire tip. Apply color gel, cure and seal with Secret Beyond Shine Sealer. Perfect adhesion & durability Thanks to ShapeX Prep, the gel bonds seamlessly with the inside of the tip and ensures maximum durability without lifting.

JUSTNAILS Tip Glue Gel in Tube thick Fast and secure attachment of full cover press on tips With the JUSTNAILS Tip Glue Gel in Tube thick, full cover press on tips can be attached quickly, cleanly and with extreme durability, without the need for a classic gel build up. Ideal for studios and professionals who want to save time while achieving a flawless and long lasting result. Why JUSTNAILS Tip Glue Gel in Tube thick Rubber like, thick viscosity consistency for maximum control, perfect for ShapeX Tips No running while pressing the tip into place No build up required, saves a significant amount of time Perfectly matched to JUSTNAILS Fullcover Press On Tips and ShapeX Tips Practical tube packaging for clean and precise application Special Features ✔ Very light adhesive layer after curing, ideal for full cover tips (not comparable to a classic inhibition layer) ✔ Thick viscosity and highly stable ✔ No pre curing with a handheld lamp required ✔ Extremely strong adhesion ✔ Easy to control, no running Benefits at a Glance Reliable hold for up to 4 to 5 weeks of wear Easy application, even in a fast paced salon environment Clean work thanks to tube packaging and stable consistency Professional finish without thick gel build ups Can be combined with all JUSTNAILS PRO Polishes and all JN top coats Application For a long lasting result of up to 4 to 5 weeks, thorough preparation is essential. Prepare the natural nail and cuticle as usual. Remove all cuticle residue, lightly mattify the nail surface and complete the preparation using Ultra Prep followed by Ultra Double Bond Primer. Lightly roughen the inside of the full cover press on tip using a buffer or file to ensure optimal adhesion. Apply an appropriate amount of JUSTNAILS Tip Glue Gel in Tube thick to the inside of the tip. Place the tip evenly onto the natural nail and press it on carefully. Make sure no air bubbles form and that no gel is pushed out at the sides or into the cuticle area. Any excess gel should be removed immediately. Thanks to the thick and stable consistency, no pre curing with a handheld lamp is required. The tip will not slip. Place the hand directly into a UV or LED lamp and cure for 60 seconds. After curing, a very light adhesive layer remains. This layer is intentionally formulated and is not comparable to a classic inhibition layer. It does not affect adhesion and does not need to be removed. If necessary, smooth the transition between the tip and the natural nail using a fine drill bit to eliminate sharp or raised edges. Then roughen the entire surface of the tip to properly prepare for color application. Apply your desired color gel as usual and cure. For full cover press on tips, we especially recommend JN PRO Gel Polishes, as they are specifically formulated for optimal adhesion on tips and do not chip. Finish the application with Secret Beyond Shine or the HEMA free Top Coat. Pro Tip For full cover press on tips, we recommend JN PRO Gel Polishes. They adhere exceptionally well to ShapeX Tips and do not chip. Refill and Removal Refill by completely filing down the tip Alternatively, refilling with a builder gel is possible Complete removal can be done using acetone or soak off remover Important Notes ❗ Only suitable for attaching full cover press on tips ❗ Not suitable for classic gel sculpting or nail art Warnings Very toxic to aquatic life with long lasting effects. Keep out of reach of children. Avoid inhalation of dust, fumes, gas, mist, vapor or aerosol. If skin irritation or rash occurs, seek medical advice. In case of eye contact, rinse cautiously with water for several minutes. Avoid release into the environment. Dispose of contents and container in accordance with national regulations. FOR PROFESSIONAL USE ONLY

JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system you now have even more options. You no longer need a gel build-up layer and therefore save an enormous amount of time.   The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail. Thanks to the innovative material, which is far superior to regular ABS plastic nail tips, it is now possible to dissolve the tips even more quickly and there is a completely new way of applying them:   APPLICATION   MATERIAL: Polymethyl methacrylate - high-quality, stable plastic that is both lightweight and very robust.   1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now attach the tip with several gels. You have the choice between:   Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube   2. Choose the right tips and ideally place them in position before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel to the natural nail and allow it to harden in the lamp for 60 seconds. 4. Now apply the ShapeX PREP to the inside of the tip. The top tip layer is softened so that it can optimally bond with the next gel layer. Now wait approx. 1 minute until the next step so that the liquid can evaporate completely. 5. Now apply a layer of Xpress Tip Glue Gel to the softened layer of the tip and then press it carefully onto the nail that has already been prepared with the same gel. The sweating layer of gel on both sides will ensure that everything bonds together perfectly. Be careful not to apply too much gel and not to squash it into the nail edges. First press the tip at the top and then go down carefully so that no air bubbles form. Do not press too hard so that the gel is not squeezed out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp on the finished nail for approx. 10-20 seconds to solidify the gels together. If you are using a lamp with more than just one LED and more than 3W, you can now cure the nail for good. To cure the gel, place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer.   For a refill, you can soak the entire nail with Remover including the tip, or file off the entire tip together with the underlying gel. Always leave a thin layer of residual gel on the nail when filing to protect it.

JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system you now have even more options. You no longer need a gel build-up layer and therefore save an enormous amount of time.   The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail. Thanks to the innovative material, which is far superior to regular ABS plastic nail tips, it is now possible to dissolve the tips even more quickly and there is a completely new way of applying them:   APPLICATION   MATERIAL: Polymethyl methacrylate - high-quality, stable plastic that is both lightweight and very robust.   1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now attach the tip with several gels. You have the choice between:   Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube   2. Choose the right tips and ideally place them in position before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel to the natural nail and allow it to harden in the lamp for 60 seconds. 4. Now apply the ShapeX PREP to the inside of the tip. The top tip layer is softened so that it can optimally bond with the next gel layer. Now wait approx. 1 minute until the next step so that the liquid can evaporate completely. 5. Now apply a layer of Xpress Tip Glue Gel to the softened layer of the tip and then press it carefully onto the nail that has already been prepared with the same gel. The sweating layer of gel on both sides will ensure that everything bonds together perfectly. Be careful not to apply too much gel and not to squash it into the nail edges. First press the tip at the top and then go down carefully so that no air bubbles form. Do not press too hard so that the gel is not squeezed out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp on the finished nail for approx. 10-20 seconds to solidify the gels together. If you are using a lamp with more than just one LED and more than 3W, you can now cure the nail for good. To cure the gel, place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer.   For a refill, you can soak the entire nail with Remover including the tip, or file off the entire tip together with the underlying gel. Always leave a thin layer of residual gel on the nail when filing to protect it.

JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system you now have even more options. You no longer need a gel build-up layer and therefore save an enormous amount of time.   The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail. Thanks to the innovative material, which is far superior to regular ABS plastic nail tips, it is now possible to dissolve the tips even more quickly and there is a completely new way of applying them:   APPLICATION   MATERIAL: Polymethyl methacrylate - high-quality, stable plastic that is both lightweight and very robust.   1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now attach the tip with several gels. You have the choice between:   Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube   2. Choose the right tips and ideally place them in position before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel to the natural nail and allow it to harden in the lamp for 60 seconds. 4. Now apply the ShapeX PREP to the inside of the tip. The top tip layer is softened so that it can optimally bond with the next gel layer. Now wait approx. 1 minute until the next step so that the liquid can evaporate completely. 5. Now apply a layer of Xpress Tip Glue Gel to the softened layer of the tip and then press it carefully onto the nail that has already been prepared with the same gel. The sweating layer of gel on both sides will ensure that everything bonds together perfectly. Be careful not to apply too much gel and not to squash it into the nail edges. First press the tip at the top and then go down carefully so that no air bubbles form. Do not press too hard so that the gel is not squeezed out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp on the finished nail for approx. 10-20 seconds to solidify the gels together. If you are using a lamp with more than just one LED and more than 3W, you can now cure the nail for good. To cure the gel, place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer.   For a refill, you can soak the entire nail with Remover including the tip, or file off the entire tip together with the underlying gel. Always leave a thin layer of residual gel on the nail when filing to protect it.

JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system you now have even more options. You no longer need a gel build-up layer and therefore save an enormous amount of time.   The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail. Thanks to the innovative material, which is far superior to regular ABS plastic nail tips, it is now possible to dissolve the tips even more quickly and there is a completely new way of applying them:   APPLICATION   MATERIAL: Polymethyl methacrylate - high-quality, stable plastic that is both lightweight and very robust.   1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now attach the tip with several gels. You have the choice between:   Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube   2. Choose the right tips and ideally place them in position before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel to the natural nail and allow it to harden in the lamp for 60 seconds. 4. Now apply the ShapeX PREP to the inside of the tip. The top tip layer is softened so that it can optimally bond with the next gel layer. Now wait approx. 1 minute until the next step so that the liquid can evaporate completely. 5. Now apply a layer of Xpress Tip Glue Gel to the softened layer of the tip and then press it carefully onto the nail that has already been prepared with the same gel. The sweating layer of gel on both sides will ensure that everything bonds together perfectly. Be careful not to apply too much gel and not to squash it into the nail edges. First press the tip at the top and then go down carefully so that no air bubbles form. Do not press too hard so that the gel is not squeezed out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp on the finished nail for approx. 10-20 seconds to solidify the gels together. If you are using a lamp with more than just one LED and more than 3W, you can now cure the nail for good. To cure the gel, place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer.   For a refill, you can soak the entire nail with Remover including the tip, or file off the entire tip together with the underlying gel. Always leave a thin layer of residual gel on the nail when filing to protect it.

JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system you now have even more options. You no longer need a gel build-up layer and therefore save an enormous amount of time.   The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail. Thanks to the innovative material, which is far superior to regular ABS plastic nail tips, it is now possible to dissolve the tips even more quickly and there is a completely new way of applying them:   APPLICATION   MATERIAL: Polymethyl methacrylate - high-quality, stable plastic that is both lightweight and very robust.   1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now attach the tip with several gels. You have the choice between:   Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube   2. Choose the right tips and ideally place them in position before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel to the natural nail and allow it to harden in the lamp for 60 seconds. 4. Now apply the ShapeX PREP to the inside of the tip. The top tip layer is softened so that it can optimally bond with the next gel layer. Now wait approx. 1 minute until the next step so that the liquid can evaporate completely. 5. Now apply a layer of Xpress Tip Glue Gel to the softened layer of the tip and then press it carefully onto the nail that has already been prepared with the same gel. The sweating layer of gel on both sides will ensure that everything bonds together perfectly. Be careful not to apply too much gel and not to squash it into the nail edges. First press the tip at the top and then go down carefully so that no air bubbles form. Do not press too hard so that the gel is not squeezed out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp on the finished nail for approx. 10-20 seconds to solidify the gels together. If you are using a lamp with more than just one LED and more than 3W, you can now cure the nail for good. To cure the gel, place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer.   For a refill, you can soak the entire nail with Remover including the tip, or file off the entire tip together with the underlying gel. Always leave a thin layer of residual gel on the nail when filing to protect it.

JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system you now have even more options. You no longer need a gel build-up layer and therefore save an enormous amount of time.   The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail. Thanks to the innovative material, which is far superior to regular ABS plastic nail tips, it is now possible to dissolve the tips even more quickly and there is a completely new way of applying them:   APPLICATION   MATERIAL: Polymethyl methacrylate - high-quality, stable plastic that is both lightweight and very robust.   1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now attach the tip with several gels. You have the choice between:   Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube   2. Choose the right tips and ideally place them in position before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel to the natural nail and allow it to harden in the lamp for 60 seconds. 4. Now apply the ShapeX PREP to the inside of the tip. The top tip layer is softened so that it can optimally bond with the next gel layer. Now wait approx. 1 minute until the next step so that the liquid can evaporate completely. 5. Now apply a layer of Xpress Tip Glue Gel to the softened layer of the tip and then press it carefully onto the nail that has already been prepared with the same gel. The sweating layer of gel on both sides will ensure that everything bonds together perfectly. Be careful not to apply too much gel and not to squash it into the nail edges. First press the tip at the top and then go down carefully so that no air bubbles form. Do not press too hard so that the gel is not squeezed out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp on the finished nail for approx. 10-20 seconds to solidify the gels together. If you are using a lamp with more than just one LED and more than 3W, you can now cure the nail for good. To cure the gel, place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer.   For a refill, you can soak the entire nail with Remover including the tip, or file off the entire tip together with the underlying gel. Always leave a thin layer of residual gel on the nail when filing to protect it.

JUSTNAILS ShapeX Fullcover Press On System Nails With this new innovative system you now have even more options. You no longer need a gel build-up layer and therefore save an enormous amount of time.   The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail. Thanks to the innovative material, which is far superior to regular ABS plastic nail tips, it is now possible to dissolve the tips even more quickly and there is a completely new way of applying them:   APPLICATION   MATERIAL: Polymethyl methacrylate - high-quality, stable plastic that is both lightweight and very robust.   1. Prepare your nails, cuticles and nail plate as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. You can now attach the tip with several gels. You have the choice between:   Xpress Tip Glue Gel thin Xpress Tip Glue Gel thick - in tube   2. Select the appropriate tips and ideally place them in position before applying the gel. 3. Apply a very thin layer of the Xpress Tip Glue Gel to the natural nail and allow it to harden in the lamp for 60 seconds. 4. Now apply the ShapeX PREP to the inside of the tip. The top tip layer is softened so that it can optimally bond with the next gel layer. Now wait approx. 1 minute until the next step so that the liquid can evaporate completely. 5. Now apply a layer of Xpress Tip Glue Gel to the softened layer of the tip and then press it carefully onto the nail that has already been prepared with the same gel. The sweating layer of gel on both sides will ensure that everything bonds together perfectly. Be careful not to apply too much gel and not to squash it into the nail edges. First press the tip at the top and then go down carefully so that no air bubbles form. Do not press too hard so that the gel is not squeezed out again. 6. Now hold our handy UV/LED hand lamp or the swan lamp on the finished nail for approx. 10-20 seconds to solidify the gels together. If you are using a lamp with more than just one LED and more than 3W, you can now cure the nail for good. To cure the gel, place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer.   For a refill, you can soak the entire nail with Remover including the tip, or file off the entire tip together with the underlying gel. Always leave a thin layer of residual gel on the nail when filing to protect it.

Xpress Tip Glue Gel - for attaching the JustPress Tips to the nail  ATTENTION: THE NEW TPO free VERSION HAS A RECIPE CHANGE! The Xpress Tip Glue Gel now has a thick viscous consistency!With this new innovative system you now have even more possibilities. The shapes of the JustPress Fullcover Press on Nails are already predefined, matted on and no longer need to be filed from above and below. You no longer need a gel build-up layer and therefore save an enormous amount of time. The tip of the tips is made extra thick so that they do not tear during the wearing time and the back part is kept extra thin so that it adapts better to the nail.  This Xpress gel in the practical brush bottle has NO sweat layer and is therefore ideal for the JustPress tips. Thanks to its thick viscous consistency, it is super easy to apply to the art tip and press onto the natural nail without running off.   Application: For a long-lasting result for up to 4 weeks: Prep your nails and cuticles as usual and complete the preparation with our Ultra Prep and our Ultra Double Bond Primer. Now you can apply our special Xpress Tip Glue Gel to the inside of the tip and press it onto the nail. Hold our handy UV/LED hand lamps on it for approx. 10 seconds while you press the tip onto the nail with the other hand, or use our practical Tip Clip Holderto cure the gel and then place the hand in a UV/LED lamp for 60 seconds to cure the gel completely. Please note that if you do not use a hand lamp beforehand, the tip may slip in a normal lamp as you cannot press it into shape. If necessary, file the transition from the tip to the nail edge with a suitable router bit to conceal protruding and angular tip edges and roughen the entire tip to continue with the color application. Now you can apply and harden the desired color gel as usual. Finally, seal with our Secret Beyond Shine sealer. With a refill, the entire tip is filed off again together with the underlying gel. Always leave a thin layer of residual gel on the nail to protect it.   Properties: - 10ml in a practical brush bottle - thick viscosity - without sweat layer - curing in the UV/LED lamp:  60 sec.